(as of Sep 28, 2023 08:47:39 UTC – Details)
< Print Settings
Operating Temp: 20~35℃/68~95℉
Layer Height: 0.05mm
Exposure Time: 2~3s
Bottom Exposure Time: 45~65s
Lifting Height:
LCD Screen size less than 8.9 inches: 5mm
LCD Screen size ≥8.9 inches: ≥8mm
Rest Time After Retract/Off times /Light-off Delay: ≥2s
“Anti-aliasing”/”Grayscale”remains OFF!
Cleaning and Post-curing
Cleaning time: ≤10mins
Cleaning solvent: 95% Ethanol or IPA
Post-curing light source: 385-405nm UV(40W)
Post-curing time: 3-5min
Precautions
USE：
1. Operating temperature : 20~35℃,68℉~95℉
2. Shake well before each use.
3. Please wear nitrile rubber gloves and respiratory masks when working with any 3D printing resin and when cleaning prints, and maintain a ventilated environment.
4. Do not use resin near windows, balconies or other strong ultraviolet environment.
5. If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.
6. The resin remaining on the skin can be washed with soap, hand sanitizer, etc.
Waste liquid：
1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.
2. If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You can put the cleaning solution in the sun first,
wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used continuously.
Storage：
1. Store in a sealed, shading, and cool place.
2. Keep away from fire.
3. Keep out of reach of children.
4. If you do not need to use the resin within 1 day, please pour it into a clean, light-shielded container and keep it tightly sealed.
Do not mix the printed resin liquid with the unused resin to avoid contamination of the new resin.
Easy to Use, High Fault Tolerance for Supports and Print Settings: It is highly fault tolerant for supports and print settings, and little affected by changes in ambient temperature and humidity. It is compatible with almost all LCD/MSLA/DLP 3D printers and shares their base resin settings.
Easy to Clean, No Post-curing: The resin residue on the surface of the prints is easily cleaned by alcohol or IPA, and even if you don’t post-cure it after cleaning, you don’t have to worry about the surface of the prints being sticky or cracking later.
Low Odor, Safe Raw Material: EZprint 8K resin liquid has no unpleasant odor, is made from pure, high quality raw materials. Formaldehyde, 235 SVHC (Substances of Very High Concern) listed in the EU REACH directive, and 10 hazardous substances listed in the EU RoHS 2.0 directive are all undetected.
Stable Prints with Low Water Absorption: XIAOJIN’s test team placed the prints outdoors for three months in the summer heat and rain, and they remained intact, with no significant change in their mechanical properties.
