(as of May 30,2023 12:50:29 UTC – Details)
< Product Description
DOUMII water washable resin could reduce the curing time to a minimum of 2 seconds. (Depends on the model you print, the parameters setting and the LCD quality)
DOUMII Water Washable Resin
Bottom Exposure Time: 40s-60s
Normal Exposure Time: 2s-8s
The Setting Depends on the model you print, the parameters setting and the LCD quality.
1.Hardness 78-82 D；
2.Viscosity (25°C): 100-350 mPas
3.Liquid Density: 1.10-1.12 g/cm*
4.Tensile modulus (MPa):1200-1250
5.Elongation at break (%): 14-16%
6.Flexure Strength: 34-36 Mpa
7.Tensile strength: 26-28 Mpa
Water Washable and Excellent Fluidity
The formula has been optimized for Low viscosity, which makes the Resin has amazing fluidity like water, makes both the printing miniature and the vat easy to clean and wash by water, no more alcohol needed, save your cost, save your time.
High Quality and Low Odor
This Resin contains special acrylate monomers which could reduce the volume of shrinkage of the printing miniature with high accuracy and great stability. Besides, it has no pungent odor.
DOUMII water-washable resin in widely used in most DLP/LCD 3D printer, specially for 405nm wavelength light source, such as Anycubic Photons, Elegoo Mars, etc.
How to use:
1. Shake well before use, make sure the 3D printer’s wavelength is 405nm
2. Please check the printing parameter is set correctly before using the resin.
3. Wear gloves and mask before use, avoid contact with skin and eyes
4. If inadvertent contact, rinse with plenty of water asap, If you feel unwell, seek medical professional immediately.
5. When printing, make sure the room is ventilation and avoid sunlight or any light source which has about 405nm wavelength.
6. Recommended exposure setting: First layer exposure 20-40 seconds, normal exposure 2-10 seconds.(when the layer thickness is 0.05mm)
7. DO NOT dump waste water directly. Cure the waste water with sunlight and then filter the residue before dumping
1. Keep away from sunlight at room temperature (recommended at 15 ℃ -35 ℃ ambient)
Sealed storage, excessive dust or moisture can affect print quality, keep away from children.
Water Washable – Doumii 3D Resin could be washed easily by water instead of 95% ethyl alcohol，save your money, save your time.
Excellent Fluidity – The formula of Doumii 3D printing resin has been optimized for Low Viscosity which could shorten curing time and being easy for cleaning the vat and the miniature.
Well compatibility – Doumii 3D UV Resin is designed for DLP/LCD 3D printers, specially for 405nm UV-cured LCD 3D printers such as Anycubic, Elegoo and etc.
High Quality – No pungent odor, High Precision & Low Shrinkage, has good combination of hardness and toughness.
Well packaging – Thickened aluminum bottle has the cap with no sharp edge, to prevent you from hands cuts.