(as of Nov 04, 2023 10:12:50 UTC – Details)
<
Specification:
Material: PC material mounted soft magnet material
Product size: 235x235mm
Material: Plastic + Magnetic
Applicable model: for Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 3 V2 New/ Ender 3 New/ Ender 3 S1 /Ender 5 Pro 3D printer heated bed
Product Description:
The product is divided into two parts: A (upper)+B(lower) Part A: The top is a matte surface, and the back is magnetic (the interaction with the front of Part B plays an attractive role)
Part B: The top is magnetic (with the adsorption under the A part), the back is the adhesive (posted on the printer platform, which plays a fixed role)
How to use:
To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface.
If it fails to adsorb, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate.
【Easy to install】: After finding the correct magnetic direction, then you can stick the bottom part on the hot bed. The build surface comes with an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the normal build plate.
【Easy Model Removal】: Flexible soft magnet platform, strong flexibility, can be bent to take the mold, and the mold can be taken out by directly separating the membrane surface.This surface is easily removed and flexible.
【Reusable】: The Heated Bed surface can work at 70°C, high temperature does not demagnetize.the hot melt material and the printing layer are well combined to reduce the deformation caused by shrinkage, and avoid warping, wear-resistant ,scratch-resistant and hand sweat, can be used repeatedly.
【Wide application】: 235x235mm detachable magnetic 3D printer build surface for Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 3 V2 New/ Ender 3 New/ Ender 3 S1 /Ender 5 Pro 3D Printer.
