(as of Jan 30, 2024 02:32:37 UTC – Details)
<After upgrading, the heating block and radiator are connected by two titanium alloy screws to avoid bending and breaking during high-speed printing. The throat is wrapped with chromium zirconium copper for better heat dissipation. The connection between the heating block and the radiator is fixed by two titanium alloy screws to avoid bending and breaking of the throat during high-speed printing.
Package Dimensions ‏ : ‎ 4.41 x 3.27 x 1.18 inches; 2.08 Ounces
Date First Available ‏ : ‎ August 16, 2023
Manufacturer ‏ : ‎ Yunbotong
ASIN ‏ : ‎ B0CFSY98ZK
All metal smooth insulation, composed of bimetallic copper and titanium alloy insulation sections, provides better heat dissipation effect. The throat is closely integrated with the heating block, and the structure of the throat has been upgraded. A step limit has been added at the fitting point with the heating block, reducing the phenomenon of material leakage and detachment.
This kit is upgraded to a completely new design version, which can directly replace the hot end of the original Bb Lab X1/X1 Carbon/P1P models, and can be used with other DIY designs. The heating block has been upgraded to chrome zirconium copper nickel electroplating treatment, with high temperature resistance of 500 degrees Celsius printing and fast thermal conductivity.
The roughness of the inner wall of the throat and nozzle is Ra0.4, reducing blockage and improving printing quality. The connection between the heating block and the radiator is upgraded to two titanium alloy screws for fixation, avoiding the bending and breaking of the throat during high-speed printing. At the same time, titanium alloy has better insulation effect and increases stability.
The anode black radiator and bimetallic insulated titanium alloy throat are fixed and locked with M3 top wire, which is easy to install, stable to connect, and can be disassembled and replaced, reducing the cost of use.
Packaging: 1 set of hardened steel nozzles with a diameter of 0.4MM, and 1 high flow 3-hole nozzle as a spare part. The picture content shows the shipped accessories. Note that thermal and ceramic heating pads are not suitable for the original P1P machine terminals and are compatible with X1 Carbon X1 Carbon Combo
