Time is running out! Nominate now for the 3D Printing Industry Awards 2023.
Hong Kong-based 3D printer manufacturer Peopoly has launched the Magneto X, the world’s first MagLev-based desktop FFF 3D printer.
Peopoly’s new 3D printer eliminates belts and pulleys and uses a proprietary MagXY magnetic linear motor system for the X and Y axes. According to Peopoly, this magnet-powered system enables high-performance 3D printing and combines fast 3D printing speeds with a high level of precision and reliability.
MagLev (short for magnetic levitation) technology is typically reserved for high-speed trains and low-noise aerospace applications. Earlier this year, Boston-based ultra-quiet vertical flight systems developer MagLev Aero partnered with 3D printing OEM GE Additive’s AddWorks consulting team to develop the company’s proprietary MagLev HyperDrive flight propulsion platform. This magnetically powered platform is designed for use on electric vertical takeoff and landing (eVTOL) aircraft.
Peopoly’s new MagLev 3D printer is now available for pre-order via the company’s official website. The Magneto
Initial availability is open to customers in the United States, Canada, the United Kingdom, the European Union and Australia. Delivery of the first units will begin in mid-November.
The new Magneto X MagLev 3D printer from Peopoly. Photo via Peopoly.
Key Features of the Magneto X
Key to the Magneto’s Functionality Using electromagnet technology instead of traditional belts and pulleys, this motion system is designed to eliminate artifacts such as ringing and vertical fine artifacts (VCA) that are common with FFF 3D printers.
Additionally, the MagXY system stays cool during 3D printing, enabling high accuracy and repeatability of 3 microns. This is achieved through a true closed-loop system with position feedback. According to Peopoly, the motor can self-correct lost steps and offers extensive optimization data.
Magneto X’s MagXY magnetic levitation linear motor system. Photo via Peopoly.
3D printers that rely on stepper motors can often suffer from reduced precision under heavy loads, a limitation that the new Magneto X does not have. The Magneto linear motor system
Additionally, unlike traditional belt-driven 3D printers, the Magneto X does not require tension adjustments or extruder replacement. Lower rail friction is also expected to extend system life, reduce the need for frequent calibrations, reduce downtime and provide long-term cost savings. According to Peopoly, this durability makes the MagLev 3D printer ideal for high-production applications such as home businesses and 3D printing farms.
The low-friction linear motor of the Magneto X also enables high 3D printing speeds. In fact, this new FFF 3D printer can achieve 3D printing speeds of up to 1200 mm/s, with a maximum acceleration speed of 22,000 mm2/s.
High-speed 3D printing can often result in compromises in quality and reliability. However, Peopoly claims that the Magneto X overcomes this problem through the extrusion system’s ability to extrude material quickly and evenly.
The Magneto X with optional side and top covers. Photo via Peopoly.
The 3D printer’s Lancer extruder offers an extrusion force of 90 Newtons and a filament speed of 30 mm/s. In addition, thanks to a variable length melting zone, a maximum flow rate of up to 60 mm3/s can be achieved. In addition, the Magneto
The Lancer extruder also has a load sensor and a filament runout sensor. Before each 3D print, the four independently driven Z-axis rods of the Magneto X are calibrated by the load sensor, thus leveling the build plate. The extruder then performs a 48-point mesh measurement on the build plate, which can quickly heat up to 130°C, and captures detailed data for calibration. This mesh data is used to adjust the Z offset to ensure precise automatic bed leveling. In addition, the filament sensor constantly monitors the material level, preventing 3D printing failures due to material shortages.
A close-up of the Magneto X’s extruder. Photo via Peopoly.
With a build volume of 400 x 300 x 300 mm, the Magneto X is well suited to 3D printing parts for a range of applications. In addition, Peopoly’s new 3D printer is equipped with a 300℃ hot end and features 0.4mm copper and hardened steel nozzles. Therefore, the Magneto X is compatible with a wide range of materials such as PLA, PETG, ABS, ASA and nylon carbon fiber.
The Magneto X features a 7-inch IPS touchscreen user interface and runs Klipper firmware. This firmware is intended to contain a transparent code base, whereby the 3D printer does not store or send any data to the cloud. Peopoloy claims that this ensures functionality in addition to complete security and IP protection. The Magneto X also supports Orca Slicer, PrusaSlicer and Cura and offers multiple connection options including Wi-Fi, Ethernet and an SD card offline mode. A 1080P HiDef camera is also included, enabling real-time 3D printing monitoring and time-lapse recording.
The Magneto X user interface. Photo via Peopoly.
In addition, a jet stream-style side fan ensures even cooling during fast 3D printing.
Technical specifications and prices
The new Magneto X is available for pre-order now and starts at $1,399. However, after the pre-order period ends, this is expected to rise to a standard retail price of $1,999.
Ordering for Magneto According to Peopoly, this process takes about three minutes.
| 3D printing technology | Fusible filament production (FFF) |
| movement system | MagXY |
| Movement precision | 3 µm |
| Error correction | Completely closed circuit |
| Maximum 3D printing speed | 800 mm/s at 0.2 mm layer height 1200 mm/s at 0.1 mm layer height |
| Maximum driving speed | 1500mm/s |
| Maximum acceleration | 22000mm/s2 |
| 3D printing volume | 400x300x300mm |
| Create platform | 400x300mm |
| Dimensions of the 3D printer | 55x61x70cm |
| Leveling | Automatic leveling of 48 mesh points via a force measuring sensor |
| Extruder name | Lancer |
| Maximum hot end temperature | 300℃ |
| Maximum extrusion force | 90 newtons |
| Maximum filament speed | 30mm/s |
| Nozzle material | Copper, hardened steel |
| Supported materials | PLA, PETG, ABS, ASA, PA6, PA12, PA-CF, PC-GF, TPU and more |
| Slicer compatibility | Orca Slicer, PrusaSlicer, Cura |
| Firmware | rock |
| camera | 1080P, 30FPS |
Subscribe to the 3D Printing Industry newsletter to stay up to date with the latest 3D printing news. You can also follow us on Twitter, like our Facebook page and subscribe to the 3D Printing Industry YouTube channel to access more exclusive content.
Are you interested in working in the additive manufacturing industry? Visit 3D Printing Jobs to view a selection of available positions and boost your career.
