Shopping Cart

Welcome You To The  3D Printing Zoom Store…

search

Results for ultrabase petg

Here 's list of search results found relevant to the keyword 'ultrabase petg':

Results more relevant:



 petg curling on the ultrabase *solved* (sort of):35672 ...
Hello guys and girls I really need some help letting PETG prints stick to the bed. I have been trying to print with PETG for some time now and small prints turn out oke but the problem is when I try to print bigger objects they start curling of the print bed. I tried turning my part cooling fan all the way down to 30% or even 15% and the heat bed I tried 70, 80 and now even 90C but that doesn ...

 ultrabase and petg. : 3dprinting - reddit
The ultrabase has a layer of some type of silicone on it so petg is not problem as far as that goes. The ultrabase is kind of a different type of print surface. With pla and petg they adhear only when the build plate is hot once it cools down things just pop off. But I did screw up my first one with printing pla too cool.

 printing with petg on ultrabase – general discussion ...
Printing with PETG on Ultrabase. I printed a PI case in PETG and had huge difficulty with first layer adhesion of the small details around the knock-out and the Celtic logo. I eventually got an OK case which is mechanically sound but the detail is horrible.



Other results:



 anycubic ultrabase - petg adhesion tips? : 3dprinting
I had adhesion issues with PETG on glass. I ended up using glue stick. My bed is leveled with a gap of .18mm (actually .08mm and z-adjusted in Slic3r) and the first layer is hot 90 degrees C and extruder 240. Then I scale it back to 75 degrees on the bed with 50% fan. As far as speed, I try to keep it around 30.

 warping petg su piatto ultrabase - anycubic - stampa 3d forum
Buonasera a tutti, ho un problema con delle parti stampate con PETG AMAZON, temepratura di piatto 80°C, 225° hotend. Pezzi con pareti di 4 mm e infill del 20%. Ventola di raffreddamento spenta, brim di 5 mm. Nonostante questo i pezzi di alzano agli angoli anche di 1 mm alla fine. Secondo voi, sar...

 anycubic ultrabase | duet3d
Hello everyone, Looking for help with my Ultrabase as I am having adhesion issues with PETG. After sanding the surface a bit with 300-600 grit sandpaper adhesion is getting better but the filament still has a tendency to ball up and stick to the nozzle instead of stick to the build surface.

 planning to print petg for first time, any special ...
When I print PETG with the ultrabase, I just put the hotbed at 90°C and the hotend at 250°C and it does the job perfectly. Flag. Morphen - in reply to LordGodd . Nov 23, 2019 . As far as printing directly onto the ultrabase goes, that was my biggest problem with PETG. I couldn't get prints to stick to it even with ...




Last Search Plugin 2.03