Sculpteo publishes State of 3D Printing 2020 survey: 3D printing for manufacturing will increase

Sculpteo publishes State of 3D Printing 2020 survey: 3D printing for manufacturing will increase

Sculpteo publishes State of 3D Printing 2020 survey: 3D printing for manufacturing will increase

Sculpteo, the Paris-headquartered 3D printing service bureau, has launched the sixth version of its annual worldwide survey, “The State of 3D Printing”. 

The report goals to offer an entire overview of the additive manufacturing world to assist enhance 3D printing enterprise technique. With over 1,600 respondents answering the survey, the most recent version is Sculpteo’s largest and most consultant report. 

The findings counsel that 3D printing continues to have an effect on the panorama of commercial manufacturing, with many producers taking discover. Many respondents agreed that 3D printing presents a significant asset in enhancing their complete manufacturing course of and boosting their enterprise methods. Though implementing the know-how has led to extra spending for a lot of firms, the companies are additionally beneath the impression that the supplies and the know-how itself will considerably evolve over the upcoming years.

Sculpteo publishes State of 3D Printing 2020 survey: 3D printing for manufacturing will increase 1Sculpteo bundle. Photograph through Sculpteo.

The evolution of additive manufacturing 

Based in 2009, Sculpteo has been offering 3D printing providers for over a decade via its on-line platform. Clients can manufacture prototypes, particular person objects, and serial manufacturing parts utilizing numerous 3D printing processes, with over 75 supplies and ending choices accessible. The corporate has areas in Paris and San Francisco, and factories throughout Europe together with the UK, Spain, Germany and Switzerland. In late 2019, Sculpteo was acquired by BASF, the biggest chemical producer on the earth.

Every year Sculpteo collects knowledge concerning the additive manufacturing trade, so as to spotlight key developments concerning the trade because it develops and evolves. Different organizations additionally creating studies on the state of 3D printing and additive manufacturing contains Wohlers Associates, which not too long ago printed its Wohlers Report 2020. Fellow 3D printing service supplier 3D Hubs additionally launched its 2020 3D Printing Tendencies report earlier within the 12 months. 

In Sculpteo’s survey, 48.1 % of respondents got here from Europe, whereas 13.1 % have been from Asia. North America elevated by 11,6 % in a single 12 months reaching practically 30 % of contributors. 62 % of respondents have an engineering background and 22 % are CEOs. They arrive from quite a lot of trade segments starting from industrial items to training or healthcare. 

Based on Clément Moreau, CEO and co-founder of Sculpteo: “Little question that 3D printing is altering the manufacturing panorama. Our sixth examine exhibits that many industries are consolidating their use of 3D printing as its function turns into extra outlined inside their manufacturing processes. Customers have gotten extra mature, but additionally extra desperate to attempt new purposes, applied sciences and supplies. With additive manufacturing evolving at such a speedy tempo, the very best is but to return!”

Levels of investment in 3D printing. Image via Sculpteo.Ranges of funding in 3D printing. Picture through Sculpteo.

The State of 3D Printing: Key findings

Key findings from Sculpteo’s State of 3D Printing survey embrace a maturing person base; 80 % of respondents have used 3D printing for greater than 2 years (+7 % vs 2019) and 31 % use it each day. 33 % of the respondents anticipate as much as a 50 % improve in investments this 12 months. The examine exhibits that just about 30 % of customers invested greater than 100ok in 3D printing this 12 months, up 5 % than 2019.

Manufacturing with 3D printing has demonstrated a continued upwards development, reaching 52 % in 2020 in comparison with 48 % in 2019. In 2015, this determine was 17 %. Nevertheless, 68 % of respondents nonetheless use 3D printing for prototyping. 

What the respondents used 3D printing for. Image via Sculpteo.What the respondents used 3D printing for. Picture through Sculpteo.

Throughout all continents, there are two central elements generally seen as limiting the potential for adoption of 3D printing. This contains the information hole at 51 %, and price of entry for 59 % of respondents, which is 10 % decrease than final 12 months. 67 % of respondents from North America additionally see finances as the best barrier to increasing using 3D printing versus 44 % in Europe.

Most of the firms that participated within the survey are assured in the advantages offered by additive manufacturing; 70 % see it as  a power and aggressive benefit. 68 % of respondents demonstrated eagerness to make use of 3D printing for extra purposes and 44 % will start to leverage additive manufacturing applied sciences. 80 % of customers agreed that machine capabilities and consistency of 3D printed elements should additionally develop to speed up the adoption of 3D Printing in any manufacturing ecosystem.

For the complete report, click on right here

The nominations for the 2020 3D Printing Trade Awards are actually open. Who do you suppose ought to make the shortlists for this 12 months’s present? Have your say now. 

Subscribe to the 3D Printing Trade publication for the most recent information in additive manufacturing. You can too keep related by following us on Twitter and liking us on Fb.

In search of a profession in additive manufacturing? Go to 3D Printing Jobs for a number of roles within the trade. 

Characteristic picture exhibits Sculpteo software program. Photograph through Sculpteo

Please give a like or touch upon  Fb for assist Us

Go to our 3D printing Organs weblog 

Go to our sponsor Virtualrealityuse

Credit score : Supply Hyperlink

Related posts