If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations.
Please note that this glass is about 1/4″ short on all sides when use on CR-10, 10S 300 series due to CR-10 heat bed size extension.
* Borosilicate is a very high temperature glass. It has a melt temperature of about 800° C and a very low thermal expansion coefficient.
* Resistant to thermal shock compared to regular glass.
* Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
* Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.
Material: 100% Borosilicate
1 x 300x300x3mm Borosilicate Glass100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use.
Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
High binding power when heating. Easy to separate the plastic parts when cooling.
Get you out of the trouble when plastic film decreased viscosity after a period of usage.
Specially designed to fit the 3D Printers Prusa, CR-10, Tevo Tornado, Mendela, AO Series. Please note that this glass bed is about 1/4″ short on all sides when use on CR-10, 10S 300 series due to CR-10 heat bed size extension.