(as of May 11,2021 13:42:27 UTC – Details)
< Product Description
WINSINN Dual Gear Extruder – CR10S PRO
New Double Gear Extrusion Mechanism. Had to change the extruder e-steps from 100 to 139UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.High quality Double gear extrusion, All-metal aluminum alloy, stable and durable.Support: 1.75mm Filament.This Kit NOT include the stepper motor, motor bracket and instruction manual, we need to DIY 🙂
Some customers encountered gear wear problems. The solution is:
✔️Had to change the extruder e-steps from 100 to 139
Because the filament is forced to be centered in both drive gear grooves, the idler drive gear (the one not attached to the motor) is positioned on it’s shaft by the motor drive dear. So, to center the idler drive gear properly, my suggestion for setting the unit up is as follows:
1) Assemble everything but do not lock the motor drive gear to the shaft.
2) Using a couple pieces of paper, shim the idler drive gear in the center of its bracket.
3) Clamp a piece of filament in the drive grooves and turn the motor a few turns. This should locate the motor drive gear in the correct position.
4) Lock the motor drive gear to the shaft, remove the paper shims, and you should be good to go.
Change the extruder e-steps from 100 to 139
We recommend E-steps: (Image 3)
Upgrade seamless connection and pressure regulation (Image 6)
60 days money-back and 24 months war ranty
1 x WINSINN CR10S Pro Dual Gear extruder Upgrade Kit (All Accessories show as Image 2)
✔️New Double Gear Extrusion Mechanism. Had to change the extruder e-steps from 100 to 139
✔️UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.
✔️All-metal aluminum alloy, High quality dual gear extrusion, stable and durable.
✔️For 1.75mm Filament. This Kit NOT include the stepper motor and instruction manual, we need to DIY 🙂
✔️Made by WINSINN, make sure the “WINSINN” label on the box for our after-sales service.