UV 3D Printing Resin (Tempest Gray) for All SLA Printers – 500mL

4,499.00$

Description

Worth: $44.99

Mechanagon resins work for all UV primarily based 3D printers examined. They mix low viscosity and quick treatment time for a resin that’s simple to work with and delivers a surprising print.

Security Information Sheet and Materials Properties Specification are offered on our web site.

Typical Settings:
Set backside publicity to 30-60 seconds and regular publicity to 6-10 seconds. This varies by printer and resin darkness.

Use:
Shake earlier than utilizing!

Use solely in effectively ventilated areas with no UV mild sources. Most indoor lights are nice. Simply do not use the stuff subsequent to a window, tanning sales space, rave, nuclear reactor core, or something like that.

Clear prints with isopropyl alcohol first, then water. End curing the prints in daylight or different UV mild supply as soon as dry. Treatment instances fluctuate by mild depth and print thickness.

Clear resin vat with isopropyl alcohol solely. Wipe the perimeters of the vat with a paper towel till a lot of the alcohol/resin is absorbed. Use a microfiber fabric to scrub the FEP Movie/backside floor of the vat for longest working life.

Security:
Put on gloves when dealing with the resin. If pores and skin contact is made, wash totally with cleaning soap and water. If in eyes, rinse for a number of minutes. The resin is pretty benign, however a Security Information Sheet is offered on our web site for additional data.

Storage and Disposal:
Substitute the rubber seal and make sure the cap is tight. Preserve the bottle away from UV emitting mild sources. Retailer in a spot the place the temperature will be maintained at 29-90°F (-2-32°C).

Any resin that’s waste (i.e. has been contaminated or in any other case has been deemed unusable) ought to be solidified with UV mild earlier than disposal. Photoinitiators used within the resin will be dangerous to aquatic life, however are rendered inert after reacting with UV mild. By no means pour uncured resin down the sink!Appropriate with all present SLA 3D printers
Gives sharp element and low shrinkage
Very low odor
Low viscosity makes for straightforward clear up