(as of Mar 16, 2024 03:26:40 UTC – Details)
< Special Attention: If There Is A Plug Phenomenon, Please Try To Reduce The Retraction Distance And Reduce The Printing Speed, Check Whether The Cooling Fan Can Effectively Dissipate Heat From The Radiator, Check Whether The Inside Of The Nozzle Is Blocked, And Check Whether The Temperature Is Calibrated. The Hot End Is Small In Size And Light In Weight, And Can Be Adapted To Common Models On The Market. The Diy Model Is Fixed And Can Print Filaments: Pla, Abs, Petg, Tpu, Pp, Pc, Peek, Pei, Etc.
Package Dimensions : 3.66 x 2.09 x 1.14 inches; 2.89 ounces
Date First Available : August 21, 2023
Manufacturer : Haldis 3D
ASIN : B0CG5BJSR5
Heat Dissipation Parameters Reference: Marlin Firmware Fill (61) Model; 100kω Formbot / Vivedino Ntc 100k Mgb18-104f39050l32 Thermistor 4.7k Pullup (Statement Is For Reference Only, Only For Marlin-V2.X-Mks-H43-Main Version Test Is Valid, Other Versions Are For Reference Only) Firmware Klipper Reference Setting Parameter: Ntc 100k Mgb18-104f39050l32, If The Temperature Fluctuation Deviation Is Large, Please Calibrate.
The Heating Block Is Upgraded To Nickel-Plated Chrome-Zirconium Copper, Which Is Suitable For High-Temperature Printing. The Ceramic Heating Temperature Rises Quickly, And The Maximum Temperature Can Reach 500 Degrees. However, The Existing Ceramic Sheet And Heat-Sensitive Accessories Need To Be Upgraded, And The Overall Temperature Resistance Is 300 Degrees.
The Nozzle Is Made Of Hardened Steel After High-Temperature Quenching And Hardening Treatment, And The Hrc Can Reach 60°, Which Is More Wear-Resistant And Prolongs The Printing Service Life.
The Roughness Of The Inner Wall Of The Throat And Nozzle Is Ra0.4, Which Reduces Plugging And Improves Printing Quality; The Overall Hot Section Is Lengthened, And The Extrusion Flow Rate Can Reach 33mm³.
The Radiator And The Throat Are Fixed With Screws, And The Connection Is Stable. The Throat Is Fixed With Two Titanium Alloy M1.6 Screws To Effectively Block Heat Transfer; The Screws Are Gently Locked During Installation, And The Force Should Be Uniform To Avoid Deformation And Hardening. The Steel Nozzle Can Be Disassembled And Replaced To Reduce The Cost Of Use; The Gas Joint Can Also Be Disassembled, And Can Be Customized And Adapted To Other Models According To The Size.
