TMC2208 3D Printer Stepstick Stepper Motor Driver, Eryone 2 Pcs TMC2208 Stepper Driver Module Full of Warmth Sink Screwdriver for 3D Printer Mom Boards Reprap MKS Prusa and Extra



Value: $17.99

#Interface: Step/Dir
1. Configuration: CFG Pins or UART
2. Native Microsteps: as much as 1/256
Three. MicroPlyer Microsteps: 1/256
four. Logic Voltage (VIO): Three-5V
5. Motor Voltage (VM): four.75-36V
6. Motor Section Present max: 1.2A RMS, 2.0A Peak. Due to this fact, the reference voltage of the motive force module shouldn’t exceed 1V. On the similar time, the motive force module should be dissipated, in any other case it’s going to have an effect on the lifetime of the motive force module.
7. Inside V- Regulator: enabled
eight. RDSon: ¡Ü0.Three Ohm
9. StealthChop (quiet): sure
10. SpreadCycle: sure
11. MicroPlayer
12. CoolStep: no
13. StallGuard: no
14. DcStep: no

Be aware:
1. TMC2208 driver wants further fan to chill it, in any other case the excessive temperature might destroy it.
2. Don’t join the motor when measuring the voltage, in any other case it’s straightforward to burn the motive force.
Three. Energy needs to be related when measuring voltage, don’t simply join USB energy provide.
four. Please pay particular consideration to instructions!

Bundle Consists of:
2 x TMC2208 Driver
2 x Warmth Sink
1 x Screwdriver
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, steady drive present 1.4A, peak present 2A, voltage vary four.75V-36V, 256 subdivision.
The versatile microPlyer interpolation unit offers as much as 256 subdivisions, permitting good sinusoidal management even in techniques with restricted pulse frequencies; sooner motor acceleration/deceleration than stealthChop, these are additionally designed as a result of stealthChop2 ultra-quiet expertise is broadly utilized to 3D printing.
Suitable with current 3D printer electronics, With a typical step/dir interface, it’s straightforward to make use of. It could actually substitute the unique TMC2100 A4988 DRV8825 LV8729.
Main Options: UART configuration interface, CoolStep present dynamic adjustment expertise, can save 70% of the vitality; dcStep , stallGuard2 stall detection expertise, Elements on backside PCB facet for higher warmth emission; Automated standby present discount.
Guarantee: each faulty merchandise can have the free substitute or refund inside 1 month, lifetime technical service.