(as of Feb 04, 2021 09:37:28 UTC – Details)
< Product Description
TENLOG 3D professional brand manufacturer
TENLOG 3D was established in 2014 and is composed of professional software TENLOG ZHANG, hardware engineer TENLOG Ma, and TENLOG YANG with more than 10 years of research and development experience.
TENLOG have developed a independent dual extruder TL-D3 Pro, Hands 2,TL-D5,TL-D6 and DLP 3d printer.
TENLOG Independent Dual Extruder 3D Printer
Specification
Printing Speed: 10-150mm/s, Recommended 30-60mm/s
Input: AC 100-240V 50-60Hz
Output: DC 24V 15A
Layer Thickness: 0.1-0.4mm
Nozzle diameter: 0.4mm
Additive manufacturing accuracy: ±0.1mm
File Format: STL, Jpq, G-Code
Max Nozzle Temperature: 300℃
Max Hot bed Temperature: 110℃
Modeling Technology: FDM (Fused Deposition Modeling)
Power Supply: 600W UL certified power supply
Printing Size: 300*300*350mm /11.8”x11.8”x13.8”
Three Printing Modes
Dual Material Printing
You can use two colored filaments to print on the model to obtain two-color models, or use two different filaments to print soluble supports (such as PVA) to accurately achieve difficult-to-place models.
Duplication Mode Printing
You can print two identical models of filaments (or the same or different filaments) of the same color or different colors on the TENLOG 3D printer at the same time, thereby doubling the printing efficiency and saving you time!
Mirror Mode Printing
You can print two symmetrical models of filaments (or the same or different filaments) of the same color or different colors on the TENLOG 3D printer at the same time,the two nozzles are dual-driven at all times for printing, and the two models are immediately aligned with the mirror.
Dual Material Printing
You can use two different filaments to print soluble supports (such as PVA) to accurately achieve difficult-to-place models.
Put in water
Put the printed model with water-soluble support into the water.
Support melts
After putting the printed model with water-soluble support in water for a period of time, the water-soluble support will fall off the printed model
Dual Material Printing
Put in water
Support melts
Resume Printing Function
In the event of an unexpected power outage or surge, the control board will remember the last recorded position of the extruder. After the power is restored, The 3D printer will resume printing from the last recorded position.
Filament Runout Detection
When the filament runout detection detects that the filament such as PLA or ABS are used up or broken, the 3D printer will save the information and suspend printing, waiting for the 3D printer to feed the filament again to continue printing.
Upgrade borosilicate glass bed
TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
Unique near-end and direct drive design
TENLOG 3D Printer uses a direct drive extruder and a powerful near-end silent motor design,so that it can print various filament,such as TPU,PVA,PLA,ABS,HIPS,WOOD,PETG,flexible.
Print size
11.8”x11.8”x13.8”
11.8”x11.8”x13.8”
8.6”x8.6”x9.8”
Driver
TMC2209
TMC2208
TMC2208
Glass bed type
Borosilicate Glass Bed
Borosilicate Glass Bed
Borosilicate Glass Bed
Filament Runout Detection
✓
✓
✓
Resume Printing Function
✓
✓
✓
Touch Screen Size
4.3”
4.3”
3.5”
Power supply
600W
600W
360W
Max Hot bed Temperature
110℃
110℃
110℃
Max Nozzle Temperature
300℃
300℃
300℃
【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
【Self-developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.