(as of Jul 22, 2023 12:51:51 UTC – Details)
<
Product Description
1 Planetary Extruder 2 25 Points Auto Leveling 3 Dual Z-axis 4 Belt Tensioner 5 Resume Printing
How to avoid one side of the first layer cannot sticking to the plate? ( calibrating the hotbed )
Please flash the latest firmware. You can download it from Sovol Official website. Setting the height of first layer to 0.3mm when you slice is recommended.
How to avoid the filament clogging in the hotend or extruder?
There is a video about the solutions of SV06 clogging issues uploaded on this product webpage. The video introduces 7 possibilities resulting in clogging and their solutions.
How to reduce the the sound of bearings during printing process?
The I3 structure printers are different from the printers driven by wheels. If you want to make printing quieter, please grease the guide rods/bearings. Or contact with us and we will send grease to you.
What can you do if you receive SV06 with defective parts or missing parts?
Please let us know through Amazon message or official website once you receive the printer. Provide us your order ID and a pic of the defective parts and we will send the replacement to you.
What can you do if above solutions cannot resolve your issue?
Please do not hesitate to let us know through Amazon message or official website. We will provide fast and easy solutions within 24 hours. Sometimes bothering problems maybe easy to resolve.
Spare Parts Available
What’s in the box
Brass Nozzle; Heat Block; Heatbreak; Thermistor; Heating Wire; Silicone Cover
What’s in the box
Extruder; Stepper Motor
What’s in the box
Spring Steel with Texture PEI Surface; Magnetic Base Sheet
Value
19.99
Value
29.99
Value
20.99
SV Series Comparison
BUILD VOLUME
220×220×250mm
220×220×300mm
300×300×400mm ( 2 colors )
280x240x300mm
350x350x400mm
240x220x300mm ( 2 colors )
280x240x300mm
EXTRUDER
Planetary Dual Gear Metal DD
Metal Direct Drive
Metal Independent Dual DD
Metal Direct Drive
Direct Drive
Metal Dual Extruder
Direct Drive
FULL-METAL HOTEND
✔
✘
✘
✘
✘
✘
✘
AUTO LEVELING
✔
✔
✔
✔
✔
✘
✘
DUAL Z-AXIS
✔
✘
✔
✔
✔
✔
✔
SILENT BOARD
✔
✔
✔
✔
✔
✔
✘
UP TO 300℃ PRINTING
✔
✘
✘
✘
✘
✘
✘
BED
PEI+Magnetic Sheet
Flexible Magnetic Sheet
Spring Steel+Magnetic Sheet
Spring Steel+Magnetic Sheet
Tempered Glass
Tempered Glass
Tempered Glass
【Planetary Dual Gear Direct Drive】Sovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
【300℃ High Temp Printing】All metal Hotend Setup makes it possible to print up to 300℃. No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260℃.)
【25-point Auto Leveling】With inductive sensor, detect the metal print bed through 25 points automatically and compensate the unevenness of the heated bed. The fast, smart, precise detection and compensation help you to get the bed leveled perfectly and get an fantastic first layer. Note: Set the height of initial layer to 0.3mm when you slice that would help you to printer better initial layer and make the filament stick to the plate better.
【PEI Build Plate】The flexible PEI-coated build plate with mesh surface design makes the prints can be removed easily without any tools. 220*220*250mm print size, enough for daily use and household use.
【Self-developed 32-Bit Silent Board】With TMC2209 drivers, makes the printer works stably and quietly. UART mode is available, so that more modifications can be done easily for advanced users.
【Customer Service】Sovol 3d printers come with one-year warranty and lifetime technical support. Any question on Sovol SV06 3d printer, just click “Ask a question” through our storefront’s page, report an issue through the “Your Orders” page. We will fast respond within 24 hours and try our best to resolve your every issue.
