(as of Nov 04, 2023 07:03:53 UTC – Details)
<
Product Description
K+ has undergone a formula upgrade based on K resin, making it an ideal material for producing functional parts or assemblies. K+ and K printed parts have similar physical properties—High stiffness and toughness, extremely high dimensional and detail accuracy. However, K+ has lower water absorption and better scratch resistance compared to K, which makes K+ more widely used, such as for parts operating in high humidity environments or components that require repeated disassembly and assembly. In addition, the K+ printed parts are pure black and will not appear blue purple in sunlight, with a texture and mechanical properties similar to those of injection molded parts.
Print Settings
Operating Temp: 20~35℃/68~95℉
Layer Height: 0.05mm
Exposure Time: 3.3~5s
Bottom Exposure Time: 50~70s
Lifting Height:
LCD Screen size less than 8.9 inches: 6mm
LCD Screen size ≥8.9 inches: ≥9mm
Rest Time After Retract/Off times /Light-off Delay: ≥2s
“Anti-aliasing”/”Grayscale” remains OFF！
Attention!
· K+ resin liquid has a special odor
· Excessive post-curing or low temperature will make prints brittle
· Do not apply too much force to the prints just after post-curing, it will take several hours for the prints to reach the mechanical properties they should have.
Cleaning and Post-curing
· Cleaning time: ≤5mins
· Cleaning solvent: 95% Ethanol or IPA
· Post-curing light source: 385-405nm UV(40W)
· Post-curing time: 10min
Material Performance Data
Viscosity（25℃）:288mpa.s
Shore Hardness: 85D
Tensile Strength: 38MPa
Tensile Modulus: 610MPa
Elongation at Break: 21.00%
Flexural Strength: 62MPa
Flexural Modulus: 1.5GPa
Water Absorption（24hr）:0.65%
Precautions
USE：
1. Operating temperature : 20~35℃,68℉~95℉
2. Shake well before each use.
3. Please wear goggles,nitrile rubber gloves and respiratory masks when working with any 3D printing resin and when cleaning prints, and maintain a ventilated environment.
4. Do not use resin near windows, balconies or other strong ultraviolet environment.
5. If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.
6. The resin remaining on the skin can be washed with soap, hand sanitizer, etc.
Waste liquid：
1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.
2. If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You can put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used continuously.
Storage：
1. Store in a sealed, shading, and cool place.
2. Keep away from fire.
3. Keep out of reach of children and pets.
4. If you do not need to use the resin within 1 day, please pour it into a clean, light-shielded container and keep it tightly sealed. Do not mix the printed resin liquid with the unused resin to avoid contamination of the new resin.
Package Dimensions : 9.96 x 4.09 x 4.02 inches; 2.67 Pounds
Date First Available : June 22, 2021
Manufacturer : RI RESIONE
ASIN : B0CGX6B7NC
High Precision, Sharp Details: Our K+ resin’s special formulation minimizes overexposure and enables our printed parts to accurately replicate intricate details from 3D data, such as grooves, textures, hairs, holes, and protrusions. These parts achieve precise assembly, making them perfect for producing precision components, assembly parts, and mini-doll accessories.
Low Water Absorption Printed Parts: Unlike materials with high water absorption, our K+ printed parts have low water absorption and are less affected by changes in humidity. They remain stable and resistant to softening, deformation, or cracking, making them suitable for high humidity environments and certain underwater operations.
Scratch Resistance: The surface of K+ printed parts is hard, with excellent scratch resistance performance. The surface of the parts will not be easily scratched by hard objects or powdery by friction. If you need to print parts that require repeated assembly or snap fit, this resin is a good choice.
Pure black, with a texture similar to that of injection molded parts: Our K+ resin is a pure black liquid, and the printed parts it produces do not exhibit a blue-purple hue in sunlight like K resin. The parts have a delicate texture that resembles injection molded parts, giving them a high-end and attractive appearance. This makes it an ideal material for producing appearance verification prototypes, artworks, interior decorations, and toy accessories.
