(as of Sep 18, 2025 10:22:14 UTC – Details)
<
Product description
M70 is high precision rigid resin,the prints have sharp details and are not easily warped.And nano powder can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.It is a good choice for printing miniatures and garage kit(GK). The wavelength range is 385-405nm, suitable for mainstream LCD/MSLA/DLP 3d printers on the market
Note:
The shelf life of our product is 1 year, but it can actually be used for 2 years.
Please feel relieved to use it
M70 High Precision 3D Printer Resin
Printing Settings
Layer thickness: 0.025-0.05mmBottom exposure time: 30-60sNormal exposure time: 2-12s
If you need specific settings, please visit the RESIONE official website
Cleaning and Post-curing
Cleaning tools: Soft brush or 2 in 1Wash Cure Machine (Do Not use ultrasonic cleaner)Cleaning time: 4minCleaning solvent: 75%-95% Ethanol or IPAPost-curing light source: 385-405nm UV(40W)Post-curing time: 1min NOTICE
Before printing: confirm whether the build plate is flat, and level the plate.Leveling:place 4 sheets of paper on the 4 corners between the plate and LCD screen, press the plate and tighten the screws in diagonal order.Slicing:turn off the anti-aliasing function.Post-curing: both the front and back sides of the prints should be cured.Post-curing in water is a better choice(Double the curing time).
Layer thickness: 0.025-0.05mm Shore Hardness: 89D HDT(0.455MPa) :68℃ Tensile Strength: 32MPa Flexural Strength: 51Mpa Notched IZOD: 6.5J/m Elongation at Break: 9% Viscosity（28℃）: 590mpa.s
Clear and sharp details
M70 3d resin will not be easily overexposed, the details of the 3D printed miniatures or hobby are still clear even after spraying and coloring.
Low shrinkage
The nano-filler in M70 3d printer resin makes the shrinkage of the prints very low.Therefore, the prints will not be severely deformed or cracked after a long time.
Smooth surface and wear-resistant
The nano-filler in M70 resin can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.Of course, nano-filler does not make the surface of the prints completely free of layer lines.
M70 is high precision rigid resin,the prints have sharp details and are not easily warped.And nano powder can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.It is a good choice for printing miniatures and garage kit(GK).
Precautions
USE：
1. Operating temperature : 20~35℃,68℉~95℉
2. Shake well before each use. If the resin is very viscous, preheat the bottle with 60℃ warm water before shaking it.
3. Please wear nitrile rubber gloves during operation and keep the operating environment well ventilated.
4. Do not use resin near windows, balconies or other strong ultraviolet environment.
5. If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.
6. The resin remaining on the skin can be washed with soap, hand sanitizer, etc.
7. Caution for people allergic to acrylics.
Waste liquid：
1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.
2. If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You can put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used continuously.
Storage：
1. Store in a sealed, shading, and cool place.
2. Keep away from fire.
3. Keep out of reach of children.
4. If the resin is not used in the 3D printer for more than 3 days, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins.
Add to Cart
Customer Reviews
4.4 out of 5 stars 312
4.3 out of 5 stars 104
4.0 out of 5 stars 39
4.4 out of 5 stars 45
4.5 out of 5 stars 49
4.4 out of 5 stars 105
Price
$72.15$72.15 $74.69$74.69 $46.79$46.79 $62.99$62.99 $64.99$64.99 $39.98$39.98
Shore Hardness
60~75A 50-60A 82D 78D 90D 80D
Tensile Strength
7.9MPa 3.8MPa 48.5MPa 21-28MPa 65.3MPa 30MPa
Viscosity（25℃）
1250mpa.s 2300mpa.s 307mpa.s 715mpa.s 396mpa.s 15mpa.s
Elongation at Break
255.1% 159% 16.80% 81-100% 10.40% 7.90%
Sharp details: M70 3d resin will not be easily overexposed, and the details of the 3D printed miniatures or hobby are still clear even after spraying and coloring
Smooth Surface and Wear-resistant: The nano-filler in M70 3d resin can fill the layer pattern on the surface of the print to a certain extent, the surface of the print is smooth and wear-resistant.Of course, nano-filler does not make the surface of the prints completely free of layer lines.
Low Shrinkage: The nano-filler in M70 3d printer resin makes the shrinkage of the prints very low. Therefore, the prints will not be severely deformed or cracked after a long time.
Removing the supports will not damage prints: Just the right mechanical properties, the supports can be easily removed without any tools and will not damage the surface of the model.
Low Odor: RESIONE insists on selecting high-quality and higher-purity raw materials, free of harmful substances, and lower volatile VOCs.
