Real E3D V6 Socks Professional (Pack of three) (V6-SOCK-PRO-3PACK)

835.00$

Description

Worth: $8.35

A pack of three authentic excessive temperature non-stick silicone socks for E3D V6 and different HotEnds additionally utilizing the E3D V6 fashion heater block with thermistor cartridges.

Unsure about this design? E3D is assured that the new-style socks will go well with virtually all clients, however E3D stored this design out there for particular use-cases. Particularly, these socks could also be preferable in set-ups the place retaining the heater block AND nozzle totally insulated are fascinating. We suggest utilizing these socks with our zero.15mm nozzles.

These socks will hold your nozzle clear and freed from burnt on blackened plastic. They do not simply hold the nozzle clear, but additionally hold warmth contained in the hotend, and off the print.

Product of a heat-resistant, non-stick silicone materials our will repel build-up of molten plastic. This actually helps with sticky supplies like Co-Polyesters and stuffed supplies that prefer to construct up on nozzles.

These additionally supply an enormous enhance in temperature stability, significantly in case you use excessive airflow cooling across the nozzle to chill the print. The extra cooling mixed with decreased radiation of warmth from the block and nozzle to the print actually enhance the flexibility to print nice overhangs and bridges, all whereas retaining the hotend temperature extraordinarily secure.

The covers merely push onto the entrance of the hotend with no disassembly – they are going to be a decent match when first pushed on chilly. When sizzling the silicone will increase to the proper measurement to suit the hotend snugly. The elastic materials will match all nozzle sizes within the vary from zero.25mm to zero.80mm.


These v6 socks are a pack of three as a result of they do not final without end. Relying on what supplies you print and the way a lot abuse they get they finally put on away on the nozzle tip. Even with sticky abrasive supplies and a little bit of abuse they need to simply final 100+ print hours. With supplies like ABS and gentler use you will get virtually infinite life. Mileage might differ.

Real E3D Components
ONLY works for HotEnds which use the E3D V6 fashion heater block
three Pack of authentic excessive temperature non-stick silicone socks for E3D V6 HotEnds
These socks will hold your nozzle clear
These socks actually helps with sticky supplies like Co-Polyesters and stuffed supplies that prefer to construct up on nozzles



Reviews

There are no reviews yet.

Be the first to review “Real E3D V6 Socks Professional (Pack of three) (V6-SOCK-PRO-3PACK)”