(as of Oct 16, 2023 00:37:00 UTC – Details)
<
Polymaker PolyLite ABS 3D Printer Filament 1.75mm – Born to be Strong (Upgraded 3.0 Version Cardboard Spool Design)
ABS 1.75 Filament Key Product Features:
- Engineered material with high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. Perfect for functional parts that require impact or hot temperature resistance;
- High stability with specialty bulk-polymerized ABS resin;
- Consistent color and dimensional accuracy realized with CCD line sensor technology;
- Carefully winded and dried and vacuum-sealed in a resealable ziplock bag with desiccant, no tangle or moisture issue;
- Cardboard spool and box are made of recycled materials that can be recycled directly after use, helping lessen plastic waste.
ABS Filament 1.75mm Printing settings:
Nozzle: 245˚C – 265˚C;
Bed: 90˚C – 100˚C;
Speed: 30mm/s – 50mm/s
Bed Surface: Build Tak, PEI sheet with ABS slurry;
Cooling Fan: LOW for better surface quality, OFF for better strength.
Tips: Please pass the ABS 3D printing filament through the fixed hole to avoid tangles after use. Using raft or brim or reducing the speed for the first layer could help avoid warping
ABS 1.75mm 3D Filament Specs:
Material: Acrylonitrile Butadiene Styrene
N.W: 1kg/3kg/5kg Filament Diameter: 1.75mm
Spool Type: Recycled cardboard
Dimensional Accuracy: 70% is within +/- 0.01, 97% is within +/- 0.02, 99% is within +/- 0.03, 99.9% is within +/- 0.04
♥We promise to offer the best purchasing experience. Feel free to contact us via Amazon when you need help, and we will reply within 24 hours.
🌡️ 【Impact and Heat Resistant】 – PolyLite ABS filament 1.75mm Neon Green is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite ABS Neon Green 3D printer filament is a good choice for functional parts that require durability or high-temperature resistance
🛠️ 【Higher Stability】 – PolyLite 1.75 ABS Filament Neon Green ( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV-resistant features, we recommend our UV-resistant ASA filament for your outdoor requirements
PolyLite ABS Neon is a new series that have 4 florescent colors: Magenta, Orange, Yellow and Green. Fluorescent colors appear intense in daylight and becomes visible to a black light in the dark (UV light)
🌡️ 【Impact and Heat Resistant】 – PolyLite ABS filament 1.75mm Neon Green is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite ABS Neon Green 3D printer filament is a good choice for functional parts that require durability or high-temperature resistance
🛠️ 【Higher Stability】 – PolyLite 1.75 ABS Filament Neon Green ( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV-resistant features, we recommend our UV-resistant ASA filament for your outdoor requirements
🔒 【Moisture Free】 – Our Polymaker Neon Green ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with desiccant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament
♻️ 【Cardboard Spool】 – Our Polymaker ABS 3D printing filament comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
⚠️ 【Important Note】 – Please pass the filament through the fixed hole to avoid tangles after use. 1.75 ABS filament requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and the odor when printed is stronger than with PLA. Using a raft or brim or reducing the speed for the first layer could help avoid warping
⚙️ 【Printing Settings】 – Nozzle: 245˚C – 265˚C; Bed: 90˚C – 100˚C; Speed: 30mm/s – 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength
🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 – We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
PolyLite ABS Neon is a new series that have 4 florescent colors: Magenta, Orange, Yellow and Green. Fluorescent colors appear intense in daylight and becomes visible to a black light in the dark (UV light)
🌡️ 【Impact and Heat Resistant】 – PolyLite ABS filament 1.75mm Neon Green is a very durable material engineered to reduce jamming. It provides high heat resistance (Vicat Softening Temperature: 104˚C) and good mechanical properties. PolyLite ABS Neon Green 3D printer filament is a good choice for functional parts that require durability or high-temperature resistance
🛠️ 【Higher Stability】 – PolyLite 1.75 ABS Filament Neon Green ( Acrylonitrile Butadiene Styrene Filament ) is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. If you need some UV-resistant features, we recommend our UV-resistant ASA filament for your outdoor requirements
🔒 【Moisture Free】 – Our Polymaker Neon Green ABS filament 1.75mm comes in a vacuum-sealed, re-sealable bag with desiccant in it, in addition to being packaged in a sturdy, sealed box, worry-free high quality package to make sure the best printing performance of your filament
♻️ 【Cardboard Spool】 – Our Polymaker ABS 3D printing filament comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
⚠️ 【Important Note】 – Please pass the filament through the fixed hole to avoid tangles after use. 1.75 ABS filament requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers and the odor when printed is stronger than with PLA. Using a raft or brim or reducing the speed for the first layer could help avoid warping
⚙️ 【Printing Settings】 – Nozzle: 245˚C – 265˚C; Bed: 90˚C – 100˚C; Speed: 30mm/s – 50mm/s; Bed Surface: BuildTak, PEI sheet with ABS slurry; Cooling Fan: LOW for better surface quality, OFF for better strength
🛡️ 【 RISK-FREE & LIFETIME TECHNICAL SUPPORT】 – We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
