TOAUTO company offer One Stop Smart Customized 3D Printing Solutions for creative makers and artist.
Type: PLA+ 1.75mm
Net weight: 1kg
Print temp(degree centigrade): 200-230
Bed temp(degree centigrade): 0-70
Heat Distortion temp(degree centigrade ,0.45Mpa): 52
Melt Flow index(g/10min): 2(190 degree centigrade /2.16kg)
Tensile Strength(Mpa): 60
Elongation at Break(%): 29
Flexural strength(MPa): 87
Flexural Modulus(Mpa): 3642
IZOD impact Strength(Kj/m2): 7
Length 1.75mm: 340~350M
Make sure this fits by entering your model number.
High quality , Zero bubble, not warped; PLA+ does not require too much heating assistance by hot bed floor , and the printed model has a much lower edge rag than PLA.
PLA+ has low shrinkage rate and it performs pretty well even when printing larger models.
PLA+ can make the print model get the same mechanical hardness as ABS, but it is easier to print on the machine than ABS.
Environmentally friendly, Beautiful appearance, high strength, Applicable to all models of 3D printers;
Good gloss and transparency, the printed model is crystal clear.