Sale!

Phrozen TR250 Engineering Resin – Deep Gray

39.00$ 34.00$

Description

Price: $39.00 - $34.00

Specification & Performance

  • Weight: 500g per bottle
  • XY Resolution: 0.047 mm
  • Layer Height / Parameter: 15 sec @ 50 um, Delay 3
  • Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
  • Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5
  • Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application
  • Key Performance: 
    • Viscosity: 61 mPa.S (25C)
    • Density: 1.10 g / cm3
    • Tensile Stress (Break): 68 MPa
    • Elongation: 8.5%
    • Tensile Modulus: 1050 MPa
    • Hardness: Shore 80D
    • Heat Deflection Temperature @0.45MPa: > 150C

About Resin Operation

  • Avoid sun light exposure.
  • After printing, stored used resin in closed and opaque bottle.
  • DO NOT mix fresh resin and used resin. 
  • Shake or stir resin properly to avoid pigment separation.
  • DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.


Safety Recommendation

  • Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.
  • DO NOT swallow resin. Go to hospital if you do it.
  • Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
  • Resin might cause slight skin irritation. Stop using it if allergy occurred.
  • Resin smells. We strongly suggest you to use it under ventilated condition.
  • Keep resin in room temperature(15 – 35 Celsius) and dry condition.
  • Keep resin away from kid.

Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5
Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application
Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
XY Resolution: 0.047 mm; Layer Height / Parameter: 15 sec @ 50 um, Delay 3
Weight: 500g per bottle


Reviews

There are no reviews yet.

Be the first to review “Phrozen TR250 Engineering Resin – Deep Gray”