Phrozen 3D Printer ABS-Like Matte Gray Resin,405nm DLP LCD UV-Curing Photopolymer Resin for General Modeling and Prototyping, High Precision Printing, Low Odor, Non-Brittle (1kg)

< Product Description

Keep resin away from direct sunlight exposure.DO NOT dump resin. Cure it completely and then treat it as general plastic waste.Wear PPE(Personal Protective Equipment) like goggles, gloves…etc.Resin should never have direct contact with your eyes or skin.Stop using UV resins if it causes allergies.

Key Performance:

Viscosity: 67 cps

Proportion: 1.1

Tg: 70 °C

Elongation: 3 %

Break value: 10 MPa

Surface hardness: Shore 76D

IZod Impact: 1.44 KJ/m2

General Modeling & Industrial Prototype Proofing

Phrozen’s ABS-like Resins create high-resolution and sturdy models that are best for general modeling and industrial applications.

Property

With its light color, it is also exceptionally suitable for painting models after the curing process. It also produces models with high-hardness, toughness, and high resolution.

Wide Applications

Phrozen’s ABS-like resin is compatible with all LCD 3D printers using the 405nm UV light source. Phrozen developed this all-round resin so that you can use it on a daily basis, either at home, in your garage, or at your office.

Spec & Properties: Volume: 1kg per bottle │ XY Planar Resolution: 0.050 mm │ Z Resolution (Layer Height): 30-100µm │
SUITABLE FOR: All LCD 3D Printers. Applicable for general modeling and prototyping.
EASY POST-PROCESSING: The texture of this resin makes coloring easy and fun, and produces low odors.
EASY TO CLEAN: To clean the printed models, all you need is an air gun and alcohol spray.
CUSTOMER SERVICE: Phrozen regards customers with the utmost priority. Our professional engineering team is willing to reply your questions and support you to print with high performance.