(as of Aug 25, 2023 12:08:02 UTC – Details)
<
NOVA3D Water Washable Photosensitive Resin is suitable for most 3D LCD printers. And it’s researched and developed by our R&D team and verified by a dedicated organization to ensure its safety.
Instead of using alcohol to clean up the prints, you can use water to wash the prints. The printed version of light resin has smooth surface, high stability, high precision, low shrinkage, non-brittle and good rigidity. And the toughness, impact resistance and flexibility are excellent.
Nova3d water washable 3d resin compatible for all printers from ANYCUBIC, Creality, Phrozen, Pruda, QIDI, ELEGOO, LONGER, NOVA, Voxelab and all kind of regular and mono LCD 3D printers.
PARAMETER
Shelf Life: 1 year
Wavelength: 405nm
Weight: 1000g
Color: white, grey, black, beige, clear, clear red, clear blue
Way to Rinse:Clean with water
Suitable for: LCD/DLP 3D Printer
Application: General modeling & Industrial prototype proofing
Operation tips:
Shake well before use(3-5 Minutes)prohibiting the use of resin in places where there is a lot of sunlight.
WARNING
1. Always wear gloves to avoid direct skin contact
2. Keep away from children, dust and direct sunlight
3. Recommended temperature 20°C – 25°C
4. Wash with plenty of water immediately if you get direct skin contact with resin
5. Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect (long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save)
✅More Flexible & Good Fluidity: This resin is flexible than standard resin, low viscosity and good fluidity make it more easier to release the model from the uncured resin. It takes less time to cure the resin, time-saving and increasing print efficiency.
✅Safer & Affordable: No longer need alcohol, IPA, industrial solvents or detergent to clean the prints, effective to avoid cleaning solvents to the body caused damage, it also save your cost and avoid inconvenience without IPA.
✅Fresh Color & Easy to Use: Fadeless, difficult to turn yellow and smooth surface after cured. Cured model is easier to remove from the platform, Utmost to reduce platform scratched when you remove the prints.
✅Wide Application & Diversified Choices : It compatible with most 395-410nm LCD DLP 3D printers on the market, please adjust your setting according to your printer wave strength. We’ll launch more different colors base on to your need, any further suggestion please contact with our supports.