$11.99 - $9.69
Do you want to purely for the better quality connectors to replace the default ones on you 3Dprinter?
This kit works great on repairing Bowden tube issues on printer.
The filament slides through easily with no issues and the fittings grab and hold the tube very well.
Good quality tubing & Excellent quality fittings that fit the tube perfectly.
This is strong and well made tubing and the lengths are ideal to give plenty of spares for 3D printers.
Great quality connectors with solid clicking and locking movement and good length of PTFE tubing.
Will work perfectly for your in creating a filament dry box for my 3D printer.
M6 threading was as described, just stuck them through a small drilled hole and put an M6 nut on the other side to hold in place.
J-head: standard size J-head with turn freely release ring is able to bear greater and stronger impulse but won’t tripping, easy to install and durable.
If you want to know more about how to use this product, you can go to YOUTUBE to watch the video.
Specification of PTFE Teflon Tube
Material: PTFE (Poly Tetra Fluoro Ethylene)，Density: 2.15-2.20g/cm3
Temperature : + 250 to – 180 ℃
Outside Diameter: 4mm, Inside Diameter: 2mm
Specification of PC4-M6 Fittings:
Material : Copper, Plastic
Thread Diameter: 6mm
Inner Diameter ( blue end ): 4mm
2 x 2M PTFE Teflon Bowden Tube
6 x PC4-M6
Compatibility: Compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8
Good quality tubing: 2 Meters ptfe teflon bowden tube (Poly Tetra Fluoro Ethylene), Density: 2.15-2.20g/cm3, it has good sealing property, high lubrication, good anti-aging ability and excellent temperature resistance (it can work for a long time at temperatures ranging from + 250 to – 180 ℃)
Excellent Quality Fittings: Contains 4pcs pc4-m6 pneumatic fitting straight push to connect are made of a good quality Brass and Plastic for an extruder frame.Thread M6/3mm, inner diameter(blue end) 4mm
Good Compatibility: This 3D printer extruder parts kit compatible with 1.75mm filament for 3D printer, support E3D V6 hotend, Ender 3, Anet A8, CR-10/CR-10S, S4, S5, Prusa i3,Monoprice select mini, Davinci mini, Wanhao duplicator, Tevo Tarantula and other 3D printer with 1.75mm filament
Easy to Use: Printe a Spool Holder for your 3D printer and a guide bracket, this was fastened to the printer case above the New Spool of PLA, the Connector screwed into the bracket then the Pipe to the intake for the Extruder
What You’ll Get: Thise set include 4 pcs PC4-M6 Fittingsand 2x 2M PTFE Teflon Bowden Tube(2.0mm ID/4.0mm OD).Replacing it with ths teflon tube resulted in far less clogged nozzels and helped with retraction