Our Rapid product range is designed for low powered LED DLP type printers such as the Wanhao Duplicator 7. The cure speed is up to 4 X faster than our standard resin. Gray is the perfect & highly recommended color for photographing your 3D prints. The solid grey appearance allows you to 3D print models or parts with a detailed smooth finish that will be grey in color when cured.Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and engineering parts.
All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.
Our resins have been tested with a ‘Shore D Hardness Durometer’ and have a rating of 70. (A hard hat has a rating of 80)
The Viscosity of our resin is 500 – 600cps @ 25°C (Brookfield RVT).
All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>