(as of Nov 02, 2023 08:01:52 UTC – Details)
<
【Easy to use】: Peel off the protective layer of the bottom tape, glue the magnetic base on the heat bed, the flexible stainless platform can be easily attached and removed, without clips to hold it in place.
【Size】: 235x235mm/9.2×9.2inch. It is applicable with LK4/LK4 PRO, or other printers that print in the same print size, such as the Ender 3, etc.. (Please measure your hot bed and make sure it is the right size for you).
【Easy Mold pickup】：Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
【Caution&After-Service】: Because the thickness of the product itself must be re-leveling after attaching this item to avoid damage the surface. Please leave a little gap like 0.1-0.2mm when leveling the platform which can offer you a better experience. If you have any question or need technical support about the product, Please press “Ask a question” through our storefront’s page, report an issue through the “Your Orders” page. We will respond with 24 hours.
