LGT LONGER PEI Sheet, 3D Printer Heatbed Hot Bed, Flexible Magnetic Spring Steel Plate, 310mm*310mm for LK1, LK5 Pro 3D Printer

<

Without tape or glue, filaments may be attached to the print bed easily. Simply take out the PEI sheet and gently bend it several times to instantly remove prints.
310mm*310mm is appropriate for LK5 PRO, LK1, U20 PRO, etc. ABS, PETG, PLA, and any other filament can be used on the PEI print side.
Made from premium spring steel that is bendable. The PEI board adheres firmly to the magnetic base and is functional even when heated to a high temperature by the nozzle. The flexible magnetic stickers can sustain extended use on the high-temperature heating beds without deforming when bent.
Without tape or glue, filaments may be attached to the print bed easily. Simply take out the PEI sheet and gently bend it several times to instantly remove prints.
310mm*310mm is appropriate for LK5 PRO, LK1, U20 PRO, etc. ABS, PETG, PLA, and any other filament can be used on the PEI print side.
Simply place the bottom adhesive side on top of the unheated bed to install. Magnetic stickers can be attached to PEI sheets with this technique.
It won’t be simple to remove the magnetic sticker if it is attached to the bed. Therefore, before removing the glue and sticking it to the heated bed of the 3D printer, please make sure you measure it precisely.
Made from premium spring steel that is bendable. The PEI board adheres firmly to the magnetic base and is functional even when heated to a high temperature by the nozzle. The flexible magnetic stickers can sustain extended use on the high-temperature heating beds without deforming when bent.
Without tape or glue, filaments may be attached to the print bed easily. Simply take out the PEI sheet and gently bend it several times to instantly remove prints.
310mm*310mm is appropriate for LK5 PRO, LK1, U20 PRO, etc. ABS, PETG, PLA, and any other filament can be used on the PEI print side.
Simply place the bottom adhesive side on top of the unheated bed to install. Magnetic stickers can be attached to PEI sheets with this technique.
It won’t be simple to remove the magnetic sticker if it is attached to the bed. Therefore, before removing the glue and sticking it to the heated bed of the 3D printer, please make sure you measure it precisely.