INNICON Fast ABS-Like 3D Printer Resin, 405nm Rapid Non-Brittle Tough High Precision Standard Photopolymer LCD DLP 3D Printing Resin UV-Curing Liquid 3D Resin Grey

<
Date First Available ‏ : ‎ November 1, 2022
Manufacturer ‏ : ‎ INNICON
ASIN ‏ : ‎ B0BL39PCVX

【Low Shrinkage, High Precision】 With this printer resin, printed parts will have high detail and a smooth finish with no deformation or noticeable shrinkage and the final cured pieces are strong without being brittle.
【Wide Applications】Given the outstanding performances, INNICON standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.
【Excellent Fluidity, Zero Waste】Able to quickly infiltrate models and cure them into shapes and tend to be making clean up and post-processing finished pieces much easier. After printing, if the photosensitive resin is not used up. It can be poured back into the resin bottle of the same color (if there are impurities, it is recommended to use a funnel to 200 mesh gauze filter)
【Hardness：82D】【Viscosity (cps, 25°C)：240】【Liquid Density：1.05-1.2】【Extension Strength：26Mpa】【Elongation at Break：43%】【Wavelength：365-405】【Curing Time：2-3s】【Shrinkage：＜1-1.8%】