#1 Best 3D Printer Controllers 25A MOSFET High Power Heated Bed Expansion Power Module MOS Tube
√This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).
√If your total power usage is 240W, and you have a 12V power supply, that means at least 20A (20X12 = 240W) is required.
Since the controller board can only set 15A, this setting will not work. To make it work, you need this extra power module.
√Under normal cooling conditions, the module found stable operation with I(Max) = 25A, and the current used should not exceed 25A.
If you plan to use a heated bed with a 3D printer that uses a 12V power supply, this module is recommended.
Net Weight: 25g
Max Current: 25A(Enhance heat dissipation)
2*Heat bed Power Module
Please double-confirm the wire you connect is right, if there have any issue please contact us before leave negative review and feedback, thanks!
Scroll up and Order Now for your 3D Printer Bro！√A general add-on heated bed power expansion module for 3D printer.
√Fit for：Anet a8 3d printers /Chitu motherboards/Lerdge board/ and other open 3D printer motherboards.
√A GOOD REPLACEMENT:This is a great creative part, is what you need, if your heated bed has stopped working due to MOSFET failure. With this additional module, the maximum current on the board can reach 25A.
√A GOOD PROTECTION: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
√AFTER-SALES SERVICE: All of our mosfets past quality inspection before shipment. Anyone receives a defective one please contact us, we guarantee to ship the new replacement.