Reuse, easy remove(it is better for removing when the plate is cooler);
Separation type bending to take the model. It’s more convenient.
No need the beauty of paper and scraper to assist the model.
Print not warped edge. No glue is needed.
Can be printed on cold bed.
Please kindly note:
If it doesn’t stick, please don’t worry, rotate the magnetic A side 90 degrees, match to the polarity.
Please level the build plate well before printing.
If the model can not stick on the plate, please don’t worry, try to Increase the temperature slightly.
Please do not let heated nozzle touch the A plate directly !
4.7″/ 120mm A Plate+B PlateUpgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, just fit for PLA filament, not for ABS PETG filament.
2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with 3M adhesive, stick on the build surface.
Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 75 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS PETG filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
Size: 120x120mm/ 4.7×4.7 inch
After-sales Support: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you.