(as of Aug 01, 2025 02:18:21 UTC – Details)
<
Product Description
eSUN 3D Printer Refill PLA Plus 1KG and Reusable Filament Holder eSpool+ Set
What is PLA+ Refilament and Reusable Filament Holder eSpool+ Set?
• PLA+ is improved and upgraded based on ordinary PLA (Polylactic Acid). It has higher strength and toughness, one of the most commonly used 3D printer materials, is an excellent choice for a wide range of printing applications.
• Bundle of eSUN 1.75mm 1kg spoolless refill PLA Plus and upgarded removable filament reel eSpool+. This new set can be compatible with AMS and most of 3d printers. Detachable reel is reusable with high compatibility. Please notice that the detachable spool has been pre-installed with the refill PLA Plus.
Available Colors:
• Cold White, Bone White, White, Black, Grey, Fire Engine Red, Pine Green
Recommended Printing Parameters:
• Printing Temperature: 210-230℃ (Recommended Temperature 215℃)
• Bed Temperature: 45-60°C
• Fan Speed and Printing Speed: 100%; 40-100mm/s
• Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI
Vacuumed Sealed Packaging:
Antioxidants + Vacuum Packaging
eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.
How to Storage:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.
Please Notice:
The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.
Comparison of eSUN PLA Series Filament
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.8 out of 5 stars 89
4.3 out of 5 stars 14,185
4.4 out of 5 stars 358
4.4 out of 5 stars 2,917
4.4 out of 5 stars 1,681
4.4 out of 5 stars 1,681
4.1 out of 5 stars 242
Price
$17.99$17.99
$14.39$14.39
$13.99$13.99
$15.99$15.99
$18.04$18.04
—
—
Density(g/cm3)
1.23
1.329
1.23
1.27
1.21
1.256
1.2
Heat Distortion Temp(0.45MPa)
53
51
53
64
50
54.7
53
Melt Flow Index(g/10min)
5(190℃/2.16kg）
5.8(190℃/2.16kg）
5.7(190℃/2.16kg）
20(250℃/2.16kg)
4.8(190℃/2.16kg）
11.32(190℃/2.16kg）
8.1(190℃/2.16kg)
Tensile Strength(MPa)
60
42
61.34
52.2
52
57.64
32.2
Elongation at Break(%)
20
50
29.92
83
14.4
21.76
68.9
Flexural Strength(MPa)
74
59.95
100.27
58.1
65
78.7
41.31
Flexural Modulus(MPa)
1973
2878.5
3824
1073
1447
2800.36
1701
IZOD Impact Strength(kJ/㎡)
6
6.2
6.3
4.7
5.86
6.45
8.58
Printing Temperature
210 – 230℃
190 – 230℃
190-230℃
230 – 250℃
190 – 230℃
190 – 230℃
190 – 270℃
Bed Temperature
45 – 60°C
45 – 60°C
45 – 60°C
75-90°C
45 – 60°C
45 – 60°C
45 – 60°C
Fan Speed
100%
100%
100%
100%
100%
100%
100%
Printing Speed
40 – 100mm/s
40 – 100mm/s
40 – 100mm/s
40 – 100mm/s
40 – 100mm/s
40 – 100mm/s
40 – 100mm/s
【Easy to Print】PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. low shrinkage, no deformation, no cracking, high printing precision. Made with starch raw materials derived from plant resources, ideal for indoor printing.
【Refill PLA Plus & Detachable Reusable Spool】Bundle of eSUN 1.75mm 1kg spoolless refill PLA Plus and upgarded removable filament reel eSpool+. This new set can be compatible with AMS and most of 3d printers. Detachable reel is reusable with high compatibility. Please notice that the detachable spool has been pre-installed with the refill PLA Plus.
【Tangle Free & No Plugging】Total Length: 340-350m. Full 1KG 3D printer refilament perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder. Meet the high speed printing demand for high-speed printers. Continues consistently outstanding performance at high speeds.
【Dimensional Tolerance +/- 0.03mm】eSUN PLA+ 3D printer filaments are produced with more precise specification. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, less stringing, extremely high successful rate.
【High Compatibility】Compatible with Most of FDM 3D Printers, such as:Bambu Lab P1P / X1 / X1C / A1 / A1 Mini, AnkerMake M5, Creality K1 / K1 Max, Voron 2.4, FLSUN V400, Prusa, UltiMaker, MK3, Ender 3, MakerBot, Flashforge, Raise3D. Good layer bonding performance meets your demands for printing functional parts with higher toughness. Widly used in machinery, electronic appliances, automobiles, decorations, COSPLAY and other items.
