(as of Aug 03, 2025 06:17:25 UTC – Details)
<
Product Description
Makermate multifunctional 3D printer enclosure is best mate for 3D printer
Fast exhaust smelly smoke and odor
if you don’t like melt plastic smell or resin odor, this enclosure will help a lot, the enclosure with all air tight zippers, so can seal the smell air well, and a 4 inch PC fan exhaust air in time.3 m length duct can help to arrange air outlet freely.
Dryer to make filament print better
When printer working, it’s cooling fan will exhaust a lot of warm air, and enclosure exhaust fan make warm air keep flow, result a dry function, when room air humidity is 70%, after 1-2 hours working, inside humidity could drop to 25%-35%, which is best humidity for most filament. dry filament could be print with less bubble so get better model surface.
Excellent warmer to improve print affect
When FDM printer working, under room temperature 26C, enclosure temperature could go to 41-42C;when LCD printer working,also could go to 35C, warmer could make filament adherence better,so print with less wrap and crack, could let resin flow fast,so print better and save printing time.
Free from water,dust and UV light
The outer layer of enclosure made of water-proof material, so it also can keep dust away, if you don’t use you printer often, you can keep it in this enclosure to keep it clean. the enclosure watching window made by dark transparent PC, so it can avoid UV light like Resin printer geniune orange cover，when you use this enclosure, you don’t need to take off /put on the cover anymore .
Reduce working noise
The enclosure is thick and sealed very well, so it can prevent noise out effectively .
Storage often use tools
There’re two tool bags on the right side, you can keep you often use 3D printer maintain tools in it.
All air tight zippers
To ensure sealing performance,all zippers use air right version, maximum reduced air leakage
Bright lighting bar
A 30 cm length lighting bar could let user see clear enough though dark transparent watching window, and it use independent control, won’t affect printer working.
Easy to on wall valve
With this valve, you can put the duct on wall easily, and it with anti backflow design.
Free exhaust direction
Both side with exhaust seat, you can free to choose one side to install duct and other side use as air inlet, both side with wire outlet.
Simple hygrothermograph
You can get basic temperature and humidity in time, but please noted that temperature and humidity near 3D printer is different ,
Big back outlet
A special designed outlet is for some LCD 3D printer like anycubic M3 max to change resin easily, you don’t need to move printer out to change resin anymore.
Free to adjust exhaust wind
When daily use, you can adjust exhaust fan speed slower(low speed with low noise), and when you need to open enclosure, you can adjust the speed to max,
Strong frame
The tubes made of strong stainless steel ,easy to assemble and disassemble
1: 【Well trap fumes,Fast Venting,Health air breath】 All opening well sealed and ports use high quality air tight zipper, maximum reduced air leakage,a 4 inch build in exhaust fan can fast vent out smell like small plastic smoke from melt ABS/PLA or other filament or resin odor efficiently,if you use your printer in your bedroom or space without enough ventilation,this enclosure will help improve your air quality,make you benefit in health.
2:【Constant warming ambient temperature,improve printing quality】With special warming layer,well recycle use the heat from nozzle,bed or cooling fan, the enclosure inside temperature could be 5-15℃(FDM 8-15℃,LCD 6-8℃) higher than room temperature ,in a warmer and stable printing environment, filament printing will with less crack,wrap or bridge, result smooth model surface, resin with better fluidity,could be cure faster and even,so with better final affect, reduce failure rate
3:【Multifunctional Usage】Warming Air flow could dry filament, 2 hours working can reduce humidity from 65% to 35%-25%; waterproof and dust-proof,3 layer thick fabric offer better noise reducing function,dark see through window with UV filter affect like printer cover do.hygrothermograph could let you know temperature and humidity in time.
4:【Simple assembling,Study structure, Convenient to use】20 minutes fast go together; stainless steel tube build a study frame;30cm lighting bar,interior reflective layer,big watching window,work together for you to watching inside; both fan and lighting bar with independent control and plug, no worries to match USB port; duct tube extend to 3m,long enough for most usage; with valve port to vent by window or wall , anti back flow , both side with vent port.
5:【Wide Compatibility】21（W）*25（D）*29.5（H）inch ,fit for Creality Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro, Anycubic Kobra/ Mega Pro/ELEGOO Naptune /Sovol SV 06 and Resin Printer Anycubic photon Mono 2/Mono S5s/Mono S5s pro/Mono X 6Ks/M3 Max/Elegoo Saturn 3/Saturn 3 Ultra/Jupiter SE/Mars 3/Mars 4 Creality Holat-Mage/Holat-Mage Pro/GKtwo 10.3/Phrozen Sonic Mighty etc,PLZ confirm printer size before order
