(as of Dec 13, 2023 23:33:43 UTC – Details)
<
Installation Notes:
※ Please clean your build plate thoroughly, let it dry.
※ Please connect your magnet to the plate, let it sit for a couple of hours so it is fully seated.
※ Please install the spring steel plate on the magnetic base.
※ Please reset the printer’s leveling settings to start printing.
Skills in use:
★ When installing the soft magnetic sheet, it is necessary to ensure that the printing platform is clean and dry. After installation, it is best to keep it in an inverted state, or it can be fixed with a clamp to ensure that the soft magnetic sheet is fully attached to the printing platform.
★ Please ensure spring steel is completely aligned with the magnetic base to avoid the resin entering the gap during use, which will affect the magnetic force of the soft magnet and cause the spring steel plate to fall off.
★ If there are burrs on the surface of the spring steel, please use sandpaper carefully to make sure that there are no burrs before using it to prevent the burrs on the spring steel from piercing the FEP film during the printing process.
★ After printing, do not excessively bend the spring steel when removing the model. After use, use alcohol or cleaning fluid to remove the residual resin on the surface.
★ After using for a period of time, if the model falls off the spring steel sheet during the printing process, you can sand the spring steel sheet with sandpaper to ensure that it has sufficient adhesion.
【Easy to use】: Easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrosion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
【Applicable 3d printer model】: The size of resin spring steel plate is (138X85mm). Such as: Anycubic photon, photon S, Photon Mono, Photon Mono SE, Qidi Shadow 5.5S, please confirm the printing platform size of your resin 3d printer before purchasing.
【Strong Adhesion】: The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
【Warranty】: If you have any problem about this product, please “ask a question” to contact us. Service within 24H everyday. We provide free return/exchange in 90 days.
