Easy-On XTC-3D Excessive Efficiency 3D Print Coating – 24oz. Unit

2,561.00$

Description

Value: $25.61

XTC-3D® is a protecting coating for smoothing and ending 3D printed components. Two liquids are blended collectively and brushed onto any 3D print. Coating self-levels and wets out uniformly with out leaving brush strokes. Working time is 10 minutes and treatment time is about four hours (relying on mass and temperature). XTC-3D® cures to a tough, impression resistant coating that may be sanded, primed and painted. Including colours and metallic results is simple. Cheap to Use – 1 ouncescovers 100+ sq. inches. 90% Time & Labor Financial savings: XTC-3D® fills in 3D print striations and creates a easy, excessive gloss end. The necessity to publish end is nearly eradicated. Coat any 3D Print Floor – XTC-3D® will be utilized to each SLA and SLS prints. It really works with PLA, ABS, Laywoo, Powder Printed Components and different inflexible media. It additionally can be utilized to coat EPS, EPDM and urethane foam in addition to wooden, plaster, cloth, cardboard and paper. XTC-3D® doesn’t include VOC’s, phthalates or phosphates. Grownup Supervision Required. Hold Out of the Attain of Kids.Epoxy Coating for 3D Printed Objects
Smooths 3D Printed Objects
Appropriate with SLA and SLS prints.
It really works with PLA, ABS, Laywoo, Powder Printed Components and different inflexible media. It additionally can be utilized to coat EPS, EPDM and urethane foam in addition to wooden, plaster, cloth, cardboard and paper.