Creality Official K2 Plus Combo 3D Printer, Multi Color Printing with CFS 600mm/s High-Speed Full Auto-Leveling Dual Al Camera Next-Gen Direct Drive Extruder Build Volume 13.78×13.78×13.78 inch

< Product Description

Creality K2 Plus Combo 3D Printer Multi Color 3D Printing with CFS High-Speed

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

Collection of Feature Upgrade Highlights

1 Multi Color Printing 2 Intelligent Manage 3 Chamber Al Camera 4 New “Matrix” Frame 5 Auto Leveling

1 350mm*350mm*350mm

2 600mm/s High Print Speed

3 Active Belt Tensioning

4 Precise Steel

5 Two Auxiliary Fans

1 Creality Filament System

2 Run-out Sensor

3 Strain Gauge for Leveling

4 Incredibly Quiet

5 Smarter Software

1 Multi-color 3D Printing

2 Meet Different Needs

3 More Use Scenarios

【Multi Color Printing with All-new CFS】One CFS can house four filament spools. With four CFS units hooked together, it is possible to deliver 16-color 3D prints, saving the need for painting afterward. By creating snap-away or water-soluble supports, the post-processing becomes a breeze. CFS is intelligent with automatic filament selection, switch, and relay. Upon loading an RFID filament, it can read the color and type instantly. When a filament is running out, it can relay with a similar one installed
【Large Size to Meet More Needs】As a pro-level 3D printing powerhouse, Creality K2 Plus offers an extraordinary 350*350*350mm build volume, great for handling larger objects or larger batches. It is the first desktop 3D printer that uses industry-grade FOC step-servo motors on all axis
【600mm/s High Speed Printing】Creality K2 Plus Combo adopting industry-grade FOC step-servo motors for the XYZ axis and extrusion, Step-servo Motor System 30000mm/s² accelaration, 40mm³/s High-flow and quiet. For a large-format machine, 600mm/s is pretty fast, but that’s not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s²
【Master of Materials & Print Quality】The active chamber heater is adopted for up to 60°C temperature inside, which is golden to forge strong prints in ASA, PPA, and other high-end materials. The new direct drive extruder assembly allows for 350℃ printing with a max 40mm³/s flow and it is clog-free & easy to maintain
【Better Accuracy】The K2 Plus nozzle tip is made of hardened steel to deal with wear-resistant engineering materials. Vibrations are minimized with a heavy-weight build and the input shaping algorithm. The dimensional accuracy of prints reaches 0.05mm. Meanwhile, there are two chamber-side auxiliary cooling fans for perfect part cooling
【Dual AI Cameras & Automation】K2 Plus features 18 smart sensors. Everything is automated and closely monitored. It has two AI cameras. One is on the chamber side to watch over spaghetti failure, idling, etc. Another is on the toolhead for flow rate optimization. No more underfeeding and overfeeding. With two Z-axis independently motorized, it can auto-adjust bed tilt before auto leveling