(as of Nov 04, 2023 09:31:57 UTC – Details)
< CCTREE is using advanced spooling technique aiming to make orderly wind and tangle-free filament. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of ± 0.03mm. It is the official partner of Creality 3D. Also, It is the ” default ” recommended filaments for many desktop and industrial 3D printers. It has the following characteristics:
Rubber-like, soft and stretchable. High resistance to chemical and UV exposure, as well to heat
Without nozzle clogging, Easy stick to the hot bed applied with washable glue stick or craft glue
The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere.
Base Material: TPU
Diameter: 1.75 mm
Tolerance: ± 0.03mm
Net Weight: 1 kg
Loop Length: 315 m
Spool Size: Diameter 195mm + inner hub 55mm + height 60mm
Shipping Weight: 1.2 kg
Shipping Size: 21 x 21 x 7 cm
Specific Gravity: 0.98 g/cm3
Tensile Strength: 50 Mpa
Impact Strength: >3 KJ/m2, Izod
Hardness: 90-95 SHORE A
Surface finish: Glossy
Transparency: Opaque
Processability: Fair
Printing Parameters
The information is given for reference only, adjust to the demand of users.
Extruder Type: Direct Drive/Bowden Tube
Layer Height: 0.1-0.4 mm
Fill Density: 100%
Printing Speed: 20-40 mm/s (Set slow printing rate is important for TPU materials)
Printing Temperature: 230 – 240°C (446-464°F)
Bed Temperature: 0-50°C (32-112°F) ;
Recommended Bed Temperature: 40-50°C (104-112°F)
Retraction Speed: 20-55 mm/s
Retraction Distance: 3-8 mm
Default nozzle Diameter: 0.4mm
