Description
(as of Jun 03,2023 21:53:53 UTC – Details)
<
√Thank you for your support, If you have any question within using,pls feel free to contact “BIGTREETECH Direct” via Amazon directly, we till get back to you within 24 hours.
√Ⅰ. Introduction
BIGTREETECH TFT50 V3.0 is a display screen with middle size, two operation mode and super clear launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD., which can perfectly replace LCD12864.
√1. Features ：
√1. MCU: ARM 32 bit and 120MHz STM32F205/207VCT6 of Cortex-M3 series.
√2. More convenient operation: upgrading the firmware by SD card.
√3. Stronger compatibility: two working model, UART screen and screen of 12864 types.
√4. UART screen supporting SD card and U disk.
√5. Having WIFI port, plugging WIFI module can achieve WIFI function.
√6. Having filament runout detection function port (FIL-DET).
√7. Having function port for automatic shutdown after printing(PS-ON)；
√8. LCD12864 mode including EXP1、EXP2、EXP3，EXP1and EXP2 is for LCD screen of ordinary motherboard, and EXP3 is for LCD screen of E3 series(like: SKR MINI E3、SKR E3 DIP etc.).
√9. TFT touch screen: UART screen RS232 port.
√10. Having 2 UART port for users DIY.
√2. Parameters ：
√Appearance size: 149*77.5mm
√Installation size: 141*69.5mm
√MCU: STM32F205/207VCT6
√Screen display area: 110.88*62.832mm
√Display resolution: 480（RGB）*272
√Backlight: 12 white LED lights
√Power input: DC 5V
√Logic voltage of SD card: 3.3V and 5V (like: supporting motherboard with control chip MEGA2560, with stronger compatibility)
√Notice: Explanation:
√1. Connecting EXP1 and EXP2 on motherboard when using screen of 12864 types.
√2. Connecting the TFT or AUX-1 on motherboard by RS232 when using UART screen mode.
√23. Two model switch: press the encoder about 3S until the mode selection page appears, then select the mode and press it.
√ 1）MCU: ARM 32 bit and 120MHz STM32F205/207VCT6 of Cortex-M3 series.
√ 2）Having WIFI port, plugging WIFI module can achieve WIFI function.
√ 3）LCD12864 mode including EXP1、EXP2、EXP3，EXP1and EXP2 is for LCD screen of ordinary motherboard, and EXP3 is for LCD screen of E3 series(like: SKR MINI E3、SKR E3 DIP etc.).
√ 4）MCU: STM32F205/207VCT6
