(as of Aug 24, 2023 01:29:33 UTC – Details)
< What you get?
1Pcs heated bed leveler devide with coin ce-ll batterry
Tips:
1. In order to fix well the coin ce-ll, let it level, our engineers designed the ce-ll Slot cover to avoid it cock up. So when you want to remove it, please use a thin small Toothpicks or Refill or needle pull it first and lightly cock up. It is easy.
2. what extruder offset from bed does it trigger at?
It works by measuring the device to see the distance between the top and the button with the light on. Then you set your z height close to it and put the device under it. Then you lower the z height yo the measured distance. Then adjust leveling knobs.
3. What if, you want to do it manually without gcode, youcan move the Z level to 5.8 mm, you move the extruder to 4 corners manually, If 5.8 is what you measured it to be that will work.
4. How to use this bed leveler well? Below steps are reference:
Auto home,
Put the board and metal sheet center point under the nozzle in the middle of the bed,
Move the Z down, progressively smaller steps, until the light just starts to flicker,
Disable your steppers,
Move to each corner and adjust them until the light just flickers,
Repeat the corner adjustments 2 to 4 times until all are set to just flicker without adjustment,
Do a Z offset(in generally, is 5.7-5.8mm, some printers are 6.0 or other data) wizard and verify the default,
You’re done
Package Dimensions : 3.74 x 2.44 x 0.55 inches; 2.12 Ounces
Date First Available : May 13, 2023
Manufacturer : Aimengda
ASIN : B0C54PMRQR
This 3D part is easy to use, compare with CRtouch and 3Dtouch thest auto sensor, 6 or 9 point leveling, or 3 Point bed leveling systems, just adjust default 5.7-5.8mm z offset. some old printers may be need gcode file if they know how to do it, we did not do all printer model apply testing, so if you meet issues when using, contact us directly or reference the experience on youtube, our engineers are here.
Compare with old version, Upgrade New version: Switch button, more smoother than old version; Coin Ce-ll slot is more Rationalization, no need to worry about install wrong “+ -“; Thin Metal sheet protect the toping central district, avoid the high temperature nozzle Collision PCB board.
If your printer has installed the auto bed leveling, like crtouch, 3dtouch, no matter kippe or marlin firmware, it is no issues to use this electronic level, just turning off them and run the print provided for the leveler device that moves the head to the four corners of the bed with a 20 second delay and use the e-leveler as instructed.
Save your leveling time: you don’t have to buy it, but it cuts down on the time it takes to level your print bed. It used to take you about 30-45 minutes. Now it’s around 7-8.
