ANYCUBIC LCD UV 405nm Fast Resin for Photon 3D Printer-1 L/ 1 kg Clear

5,899.00$

Description

Value: $58.99

Parameter info:
Dimension:1Kg/1L
Primary materials: resin monomer & photoinitiator
Publicity parameters: Backside publicity time(s) 20-60s, regular publicity time(s) 5-15s
Resin parameters:
Solidify wavelength:405nm
Hardness (D): 79.zero
Viscosity (25 ° C): 552.zero mpa.s
Liquid density: 1.100 g / cm3
Stable density: 1.184 g / cm3
Flexural energy:23.four Mpa
Tensile energy: 23.four Mpa
Elongation frequency:14.2 %
Shelf life: 1 yr
Options: UV mild will solidify the resin
Precautions:
1. Storage methodology
Stay away from mild seals at room temperature.( Sunshine incorporates loads of UV mild, will solidify photosensitive resin. After testing, the sunshine isn’t affected so long as it’s not UV mild)
It’s endorsed to avoid wasting at 15 ℃ -35 ℃ ambient temperature, the decrease the temperature, the upper the viscosity of the resin. Sealed storage, extreme mud or moisture can have an effect on print high quality. Sunshine incorporates loads of UV mild, will solidify photosensitive resin.
2.Utilization:
Shake effectively earlier than use, prohibiting using resin in locations the place there’s loads of daylight
Put on gloves earlier than use to keep away from direct contact with the pores and skin and maintain the room ventilated
Inadvertent contact, as quickly as potential to make use of loads of water rinse. If you happen to really feel unwell, search well timed medical consideration.
Printed fashions want to make use of high-concentration alcohol to wash about 30S (really helpful focus of 95% or extra, the upper the higher).
Don’t pour the resin within the resin vat into the unused resin, don’t go away the resin within the resin vat for a very long time with out use to keep away from resin air pollution have an effect on the printing impact(very long time with out the resin might be launched into hermetic containers or sealed with plastic wrap shading save).
1、Skilled LCD molding resin. Optimize the formation of LCD low mild supply and printing effectivity is increased than the market appropriate DLP / LCD / SLA resin. The resin is simply designed for the LCD mannequin of the resin, not really helpful DLP or SLA machine.
2、Excessive-speed solidify. This resin ensures the energy of molded components and never extreme shrinkage, but additionally enhance print pace, shorten the curing time and improve the printing effectivity of LCD machines as a lot as potential.
three、Sturdy adhesion of the mannequin and simple to detach after forming. Not solely excessive success price of printing and precision, but additionally to reduce resin launch pressure and adhesion, in order that the mannequin connected to the forming platform can simply shovel and low viscosity makes it simpler to wash the machine and mannequin.
four、The fabric is inflexible and hard. Sturdy materials within the shovel mannequin can simply result in the mannequin fragmentation, however too versatile materials can be susceptible to the main points of the print tensile deformation or fracture, which is able to have an effect on the molding accuracy and aesthetics.
5、Mannequin’s efficiency is steady. The resin is steady below completely different weather conditions and can be simple to retailer, overcoming the shortcomings of different resins simply damp softening and environmental corrosion



Reviews

There are no reviews yet.

Be the first to review “ANYCUBIC LCD UV 405nm Fast Resin for Photon 3D Printer-1 L/ 1 kg Clear”