(as of Jul 07, 2025 11:26:47 UTC – Details)
<
Product Description
Why do I shake the resin bottle before use?
Pigment may settle to the bottom. To ensure even pigment distribution and successful printing, shake the resin bottle for 30 seconds to 1 minute before pouring it into the resin pail.
What to do if the ambient temperature is too low?
You can soak the resin bottle in boiling water for 5 minutes, shake it and pour it into the printer slot, or try to activate the thermostat function in the printer
Makercubic³ ABS resin has good fluidity, can be quickly cured molding, to ensure high success rate of model printing, low viscosity of the prints good cleanup
Makercubic³ exclusive research and development, bending is not easy to break, can withstand a certain degree of tension and stress, with high hardness and toughness. Resin products can be tapped and drilled without cracking.
The mechanical properties of Makercubic³ ABS resin, such as high impact resistance, good strength, high toughness, and low fracture or deformation, make it possible to produce flawless 3D printed artwork.
Makercubic³abs resin ensures that it resists cracking during tapping while maintaining the integrity of the grooves. Unlike some brittle resins, it can withstand occasional damage from accidental drops when painting and handling the model.
Lower shrinkage and reduced likelihood of distortion enable you to achieve top-notch precision and display clear, vivid details in your prints. Strong adhesion to the print platform for improved success rates