3mm Thick Heating Block Cotton for 3D Printer hotend Nozzle Heat insulation-15PCS Cotton and A Roll of Tape Tool Kit for Makerbot 3D Printer/Monoprice/FlashForge/Creality CR-10

8.99$

Description

Price: $8.99

package including:

15PCS heat insulation cotton;

One Roll of PTFE High Temp Tape”

Size:Heat insulation cotton: Length 85mm/3.35in, width 20mm/0.79in, thickness 3mm

Polyimide high temp tape: Total length 30M/108ft, width 6mm/0.24in

“Notice:

1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts;

2. Please do not use flame to test their heat resistance, because the flame’s temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).

3.This Heater Block Cotton in normal working, may be appear some slight smoke, 

and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use! 

WARNING!!

1. Small parts, keep away from children This products are only suitable for 3D printer use indoors.

2.3D printer replacement parts, Always shut off power to the circuit before starting installation wo

3.The surface temperature of the 3D printer may be very high, being careful not to touch the heating element to prevent injury

4.Please read your use guideline of the 3D printer manual carefully before installing and using it.

After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts;
Please do not use flame to test their heat resistance, because the flame’s temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).
This Heater Block Cotton in normal working, may be appear some slight smoke, and the color will turn into dark brown and black is normal, it will not burn! please feel relieved to use!
3D printer replacement parts, Always shut off power to the circuit before starting installation wo
The surface temperature of the 3D printer may be very high, being careful not to touch the heating element to prevent injury


Reviews

There are no reviews yet.

Be the first to review “3mm Thick Heating Block Cotton for 3D Printer hotend Nozzle Heat insulation-15PCS Cotton and A Roll of Tape Tool Kit for Makerbot 3D Printer/Monoprice/FlashForge/Creality CR-10”