3D Printer UV Resin Curing Light with Solar Turntable 360°Rotating Stand for SLA DLP LCD 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosure

< Product Description

UV Resin Curing Light with Turntable for SLA DLP LCD 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosure

405nm UV LEDs

6 high powered 405nm UV LED lights that can fully cure resin prints in minutes.

Inline Switch

Switch on/off easily and you can leave it plugged in by using the inline switch.

Adjustable Angle

With back bracket, you can adjut it in different angle as a bottom support of the light.

DIY Curing Container

Make a cardboard box into a curing station and line with foil tape inside.

Light Driven Turntable

Absorb UV light to rotate without battery. Support model less than 1.1pound/500g.

Prints to be Smoother, Harder

Won’t have uncured residue on the surface,is much smoother and cleaner.

The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. NOTE: It can’t be used to cure liquid resin directly and can’t cure filament prints.
The 360° rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can’t use batteries for power.Maximum display /rotate weighing less than 500g/1.1Pound which is also suggested size that the light can cure. TIPS: Close to light will help to speed up and rotate heavier.
The resin can be cured in 10-15 seconds from a distance of 5 cm from the light. NOTICE: thicker parts require more time to cure. What’s more the dimension of the UV light is 3.35*4.53*3.74″ and the turntable diameter is 3.5″.
Due to the strong ultraviolet light output, please use eye protection when using this light.
Uses: UV curing, resin curing (SLA DLP print curing). The lamp can be used in DIY curing packages or handheld applications.