(as of May 08,2021 14:44:39 UTC – Details)
< Product Description
3D Printer Extruder Assembled Hotend for Creality Ender 3 /Ender 3 Pro /Ender 3X
3D Printer Parts- 3D Printing Extruder 24V 40W for Creality Ender 3 / Ender 3 Pro / Ender 3X
Note: The Ender 3 Extruder Head Kit Comfortable for Creality Ender 3 / Ender 3 Pro / Ender 3X
These are original replacement parts for Creality 3D printer Ender 3 Pro /Ender 3 /Ender 3X.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) Ender 3 Extruder Hot End Kit,
white wire was temperature thermistor, Black wire was heating tube 24V 40W
– Installation type: External thread connection
– Application: Creality 3D printers Ender 3 /Ender 3 Pro /Ender 3X
– Nozzle size: 0.4mm – Cable length: 1.2m
– Heating Tube: 24V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
– Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
HIGH QUALITY TEFLON TUBE and BRASS NOZZLE
Teflon tube: PTEF, heat and moisture resistance,non adhesion, wear and corrosion resistance.
Thermistor and heating tube: High quality thermistor and heating tube are up to 260℃,with rapid-risen temperature, precise temperature control and good stability.
NOZZLES and Hoses: The optimized internal structure of seamless connection between nozzle and heatbreak accelerates the extruder to dissipate heat and the heatbreak to insulate heat, letting go of the nozzle blockage.
Full Metal 3D Extruder Kits Hotend 24V 40W for Creality Ender 3/ Ender 3 Pro /Ender 3X
INTEGRATED SHELL OF ALL METAL
FULL METAL JACKET: Sturdy and wearable
STABLE RUNNING: Non-blockage, non-leakage
HIGH PRECISION: Heating and cooling system with high quality
The frosting surface of aluminum shell anodized for sturdy and more wearable;integrated structure and simple circuit are convenient for disassembly, repair and assembly.
Optimized design of heatbreak decreases the loss of heater block temperature by reducing heat conduction, and at the same time, it transfers its temperature to the radiator, which ensures the production stability.
with flame retardant material and good insulation, keeping heater block and nozzle clean.
3D printing brass nozzle, suitable for all kinds of 3d printer, filament smoothly feed in and push-out.wear-resistant with good compatibility. International brass nozzle with high quality has optimized design of flow channel, smooth filament path, seamless junction, less blockage problems and smooth filament-pushing.
What you get
1 x Aluminum Block
1 x Heating Tube
1 x M6x30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
5×1.75mm 0.4mm Brass Nozzle
NOTE: Ender 3 extruder kits be used on the original creality Ender 3 /Ender 3 Pro /Ender 3X. If be used to the other 3D models, customers need to afford to the responsibility by themselves, meanwhile, our after-service will not valid for this cause.Thanks for your understanding.
ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)