(as of Nov 25, 2023 11:50:59 UTC – Details)
< 1. HIGH EFFICIENCY: The has good fluidity, can effectively improve the printing speed and success rate, and the strength is enough to withstand accidental drop.
2. EASY TO CLEAN: The has very little smell during 3D printing, after printing, only use an airgun and spray to clean it, so as to avoid sticking to the pan after printing.
3. FOR 3D PRINTING: This has volume shrinkage during curing, which brings glossy and high resolution to the printed model, is a good tool for 3D printing.
4. GOOD COMPATIBILITY: The rigid is suitable for DLP LCD 3D printers, which has good compatibility, and supports 8K, especially for small and half length models.
5. WIDE APPLICATION: The 3D printing rigid has a wide range of applications, with a capacity of 1000ml, used in desktop models or industrial parts, convenient and practical.
Specification:
Item Type: 3D Printing
Capacity: 1000ml
Applicable Light Source Wavelength: 365-405nm
Underlayer Exposure Time: 20-30S
Bottom Layers: 6 layers
Regular Exposure Time: 1.5-3S
Density: 1.10-1.12g/cm³
Viscosity: 260-350mPa·s (at 25℃)
Bending Strength: 47-50Mpa
Tensile Strength: 48-54Mpa
Hot Deformation Temperature: 85℃
Glass Transition Temperature: 100℃
Shore Hardness: 82D
Fracture Elongation: 8%-12%
Note:
1. The ambient temperature is 20-30 ℃. Do not print in the window or other environment exposed to light and try to isolate children and pregn women.
2. Shake the for one to two minutes before use to avoid the components from settling.
3. It is recommended to wear nitrile gloves and protective mask when using, and keep indoor ventilation. Those who are allergic to acrylic acid should be cautious.
4. The liquid on the of the printed parts should be cleaned, and the cleaning process should not exceed 1 minute. If the cleaning time is too long, the structural performance of the parts
Package Dimensions : 9.45 x 4.33 x 4.33 inches
Item model number : DOACTgqtk8oyhrg-11
Date First Available : July 25, 2023
Manufacturer : DOACT
ASIN : B0CCSWXR41
WIDE APPLICATION: The 3D printing rigid has a wide range of applications, with a capacity of 1000ml, used in desktop models or industrial parts, convenient and practical.
EASY TO CLEAN: The has very little smell during 3D printing, after printing, only use an airgun and spray to clean it, so as to avoid sticking to the pan after printing.
FOR 3D PRINTING: This has volume shrinkage during curing, which brings glossy and high resolution to the printed model, is a good tool for 3D printing.
GOOD COMPATIBILITY: The rigid is suitable for DLP LCD 3D printers, which has good compatibility, and supports 8K, especially for small and half length models.
