(as of Jul 09, 2025 04:43:55 UTC – Details)
< Recommend print temps: PLA – 60C; HTPLA – 60C; PETG – 70-80C; PCTG – 70-80C; ABS – 100C;
Package Dimensions : 11.02 x 11.02 x 1.18 inches; 15.52 ounces
Item model number : X1 Spring steel plate
Date First Available : March 8, 2023
Manufacturer : HOCENWAY
ASIN : B0BXSSDC7N
Both sides are black PEI powder coating, the black matte is premium and cool, one plate is dual-use, very cost-effective. The build surface with PEI textured coating has strong adhesion to the printed model, and is not easy to be scratched, worn and warped.
Excellent Flatness, Easy model removal: The spring steel plate not ony has high flatness but also has good elasticity, it is not deformed after repeated bending, and easy to remove the printed model.
Keep attention to the Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface
Can print some strong stickness filaments without heating Like PLA, PETG, TPU, But Please NOTE: If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI surface.
Package :1piece double sided textured spring steel plate. (About the printing temperature recommendation, please check the following description.)
