(as of Oct 29, 2023 13:01:11 UTC – Details)
<
Product Description
Creality Ender-3 Max Neo
300*300*320mm Build Volume
CR-Touch Auto-leveling
High-precision Dual Z-axis
Power Loss Recovery
Filament Sensor
Upgrade Red Metal Extruder
Brand-new 32-bit Silent Mainboard
4.3” Color Knob Screen
Supported Filament PLA/ABS/PETG/Wood
Slicing Software Support Creality Slicer/Cura/Repetier-Host/Simplify3D
300*300*320 mm Larger Build Volume
With the 300 x 300 x 320mm Large Build Volume and an open print chamber, you’ll be able to print large 3D models with ease, or you can print several small models at the same time on the large build surface.
Accurate Auto-leveling Powered by CR Touch
Equipped with CR Touch, the 16-point automatic leveling can complete quickly with compensation for points’ printing height on the heat bed. Good efficiency saves much time.
Stable Printing with Dual Z-axes
With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.
Power Loss Recovery and Filament Sensor
Ender-3 Max Neo features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.
Smooth Feeding with Full-metal Bowden Extruder
The new upgraded extruder without pneumatic joint has high gear density, feed-in smoothly, greatly improving the performance of printer.
32-bit Silent Mainboard
The brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing.
350W High-quality Built-in Power Supply
The 350W built-in power supply is of high quality. It is more secure and reliable without exposure to parts or wires, ensuring stable operation.
4.3-inch Color Knob Screen
With icons added, the 4.3-inch color knob screen is optimized for better understanding. The automatic dimming out function saves energy.
3 Steps Assembly
Pre-installation enables the assembly to be completed within 3 steps, reducing the assembly difficulties.
Ender-3 V2 Neo
Build Volume
220*220*270mm
220*220*270mm
300*300*300mm
300*300*320mm
220*220*250mm
Extruder
“Sprite” dual-gear direct extruder
“Sprite” full-metal dual-gear direct extruder
“Sprite” full-metal dual-gear direct extruder
Full-metal Bowden Extruder
Full-metal Bowden Extruder
Leveling Mode
Auto-leveling with CR-Touch
Auto-leveling with CR-Touch
Auto-leveling with CR-Touch
Auto-leveling with CR-Touch
Auto-leveling with CR-Touch
Printing Speed
≦150mm/s
≦150mm/s
≦150mm/s
≦120mm/s
≦120mm/s
Nozzle Temperature
≦260°C
≦300°C
≦260°C
≦260°C
≦260°C
Display
4.3” color knob screen
4.3” color touch screen
4.3” color touch screen
4.3” color knob screen
4.3” color knob screen
Build Surface
PC Spring Steel Magnetic Build Plate
PEI Spring Steel Magnetic Build Plate
PC Spring Steel Magnetic Build Plate
Carborundum Glass
PC Spring Steel Magnetic Build Plate
Supported Filament
PLA/TPU/PETG/ABS
PLA/WOOD/TPU/PETG/ABS/PA
PLA/ABS/TPU/PETG
PLA/WOOD/PETG/ABS
PLA/PETG/ABS
Resume Printing
✓
✓
✓
✓
✓
Filament Sensor
✓
✓
✓
✓
X
🏆【CR Touch Automatic Leveling】:Equipped with CR Touch, the 16-point automatic leveling can complete quickly with compensation for points’ printing height on the heat bed. Good efficiency saves much time.
🏆【High-precision Dual Z-axis】:With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.
🏆【Power Loss Recovery and Filament Sensor】:Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.
🏆【Upgrade Red Metal Extruder & Low-noise Design】:The new upgraded extruder without pneumatic joint has high gear density, feed-in smoothly, greatly improving the performance of printer; and the brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing.
