Reprapper Low Warping ABS 3D Printer Filament & 3D Pen 1.75 mm (+/- 0.03 mm) 1 kg MABS Modified ABS Filament Gray

< Product Description

How to control warping?

‒ Use proper printing surface and adhesion helper

‒ Use raft or brim for the first layer

‒ Reduce the speed for the first layer

‒ Switch off the layer fan

‒ Avoid air currents and temperature changes

Great impact resistance
Higher temperature resistance
Suitable for outdoors use

Reprapper ABS 3D Printer Filament 1.75mm Reference Specs:

Recommended Print Temp
230 °C – 260°C
Heated Bed Temp
70°C – 100 °C
Printing Speed
50~80 mm/s
Fan
Low for better surface quality

Filament Type
PLA
Silk PLA
PETG
PLA+
ABS+
Standard Resin
Diameter
1.75mm
1.75mm
1.75mm
1.75mm
1.75mm

Weight
1kg/3kg
1 kg
1 kg
1kg/3kg
1 kg
500g/1000g

Low warping – Modified ABS (MABS) is formulated to have less warping than standard ABS making easier to get successful prints in domestic printers. The odor when printed is lower that of standard ABS.
Great for functional prints: Stronger than PLA and PETG, resists higher temperatures and the printed parts can be easily sanded, drilled and painted, or glued and polished using acetone.
Despite being low-warping, this ABS still requires a heat-bed and a proper printing surface to avoid warping. Big parts are prone to warp in domestic printers.
100% tangle-free and problem-free: State-of-the-art filament, produced with laser diameter control and automatic winding system guarantees success even in the longest prints. Save time and money!
Profesional packing & Technical Support– The spools are hand checked, dried and then vacuum packed in a resealable bag to preserve the filament between uses. We provide guarantee and technical support.