3dexperience modeling & simulation conference: keynote by skunk works & executive roundtable
Blog

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Final week, Dassault Systèmes, the 3DEXPERIENCE software program firm, held the 3DEXPERIENCE Modeling & Simulation Convention in Michigan. I used to be invited to attend the occasion, which was held from September 18-19 on the Suburban Assortment Showplace in Novi.

On the first plenary session, keynote speaker Clifton Davies, a Principal Aeronautical Engineer for Lockheed Martin Skunk Works, talked in regards to the protection contractor’s use of the 3DEXPERIENCE platform, and its simulation course of and design exploration apps, to work on plane design for the non-proprietary EXPEDITE undertaking.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Skunk Works started working with the Air Drive Analysis Laboratory (AFRL) on the EXPEDITE undertaking in 2017. In line with ESTECO, EXPEDITE, which stands for EXPanded MDO for Effectiveness Based mostly DesIgn TEchnologies, is the most recent in a collection of profitable AFRL applications with a objective of advancing “the state-of-the-art of Multi-disciplinary Evaluation and Design Optimization (MADO)” for USAF applications. The undertaking goals to quickly enhance early conceptual MDO capabilities for the aerospace trade in a number of areas, together with Effectiveness-Based mostly Design (EBD), high-performance computing, and value and reliability.

“No matter your enterprise course of is, there’s likelihood it wants high-performance computing,” Davies mentioned.

He defined what EXPEDITE was at the moment engaged on, stating that effectivity and help of upper constancy physics are obligatory for the duties, which included subsequent era mobility, subsequent era UAS, and high-speed methods.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

By way of delivering EBD to clients, Davies mentioned that an important facet to bear in mind just isn’t how briskly or far it may well go, but when it completed the job in an reasonably priced manner. He mentioned the design course of must be taken “down into the statistics” to search out the reply.

Davies continued, “What’s the likelihood it may well full the mission?”

Skunk Works wished to make it possible for threat to the USAF was minimal for the undertaking, and wasn’t positive if there was anybody within the MDO framework trade able to dealing with it. So the corporate partnered with Dassault, and several other different corporations, to find out who might finest handle the actual challenges of EXPEDITE.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

By way of what the corporate is utilizing on the 3DEXPERIENCE platform, the main target is principally on MDO instruments, similar to SIMULIA.

“We’re leveraging SIMULIA apps for creating MDO workflows,” Davies mentioned. “We constructed the plane design workflows for this system utilizing the SIMULIA apps.”

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

3DEXPERIENCE platform implementations can differ from very giant to very small. The EXPEDITE undertaking arrange the platform on a number of digital machines in Palmdale, California and Fort Price, Texas, so extra work might be distributed to extra places.

Davies then confirmed a slide which illustrated the conceptual design workflow that Lockheed Martin makes use of for the plane parts it’s executing with 3DEXPERIENCE. It’s damaged down into a number of actions, primarily based on each the place the undertaking may be executed and by which group.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

The corporate has additionally built-in the V5 model of Dassault’s CATIA software program program, and even constructed on high of it because of “a number of customizations,” which is why the latest model of the software program was not used. As a result of an adapter didn’t exist, the corporate needed to join CATIA by way of COM interface via a VBScript driver they wrote.

However the firm actually wished an adapter, and Davies mentioned that Dassault “actually got here via for us.”

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

“It [the adapter] helps the conventional stuff you’d count on, however this additionally helps Macros, which helps you to leverage your IP and functionality with geometry to get out what you want to do,” Davies defined.

He mentioned that probably the most helpful options of the plugin that the CATIA staff created for EXPEDITE is a Display screen Seize functionality: it permits customers to see precisely the place the method failed, which actually helps to cut back run time.

Shifting again to computing, Davies mentioned that the subsequent era of tremendous computer systems will provide loads of flexibility when it comes to the assorted 3DEXPERIENCE platforms customers can go to.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Davies wrapped up by discussing the corporate’s classes realized, subsequent steps, and future wants when it comes to 3DEXPERIENCE. He talked about how good it was to have the ability to load design knowledge with out having to go away the platform, along with having the ability to examine designs in tabular and graphical type, apply constraints, and having alternatives to streamline the person’s post-processing expertise.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

In closing, Davies mentioned that he encourages Dassault Systèmes to “proceed enhancing ergonomics for debugging fashions, finest practices for giant mannequin distribution,” and the general person expertise.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government RoundtableSubsequent up, PLM skilled Dr. Michael Grieves, Chief Scientist for Superior Manufacturing on the Florida Institute of Know-how and the daddy of the digital twin, got here onstage to talk for a couple of minutes earlier than moderating the manager roundtable.

“We’re doing a variety of thrilling issues,” Dr. Grieves mentioned.

“What I wish to discuss is the digital twin – the mannequin I developed.”

He talked about how within the 21st century, we developed 3D fashions and created a digital house crammed with digital merchandise – a giant change from years previous.

“At the start, we even have a digital twin earlier than we’ve got the bodily factor,” Dr. Grieves defined. “We actually have this digital data that we work on. I prefer to design, check, make, and help the product nearly, and solely after I get all of it proper do I wish to make bodily issues. Ideally, I’d actually prefer to print it – I feel additive manufacturing is admittedly going to alter how we manufacture issues.”

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Then he referred again to the purpose that Davies had made early on – does the product do its job?

“If we are able to take the digital twin and check that to destruction, I’ve a greater really feel for the truth that it is going to carry out the best way it’s alleged to carry out in the actual world. Digital twins will save us an entire lot of sources,” Dr. Grieves mentioned. “I ought to be capable to predict failures and repair them earlier than they occur.”

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government RoundtableThe way in which to do that, he defined, is by doing as a lot work as attainable upfront on the digital facet.

“Trade four.zero is speaking about lowering the time of an occasion occurring to fixing it. I take into consideration the digital twin as determining which occasions will happen and fixing them earlier than they occur.”

With that, Dr. Grieves launched the three audio system of the manager roundtable: Philippe Laufer, the CEO of CATIA; David Holman, Vice President R&D and Model Chief for Dassault’s SIMULIA; and Garth Coleman, the VP of Advertising and marketing for Dassault’s ENOVIA.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Coleman was in particular settlement with Dr. Grieves’ ideas on virtualization.

“We will do the modeling of the expertise properly earlier than you’ve the product out on the earth. We will innovate round that have, and embrace the client in that have,” he acknowledged.

“Upon getting the actual twin, you possibly can join that knowledge in and refine the product, the experiences, every thing.”

On this manner, Coleman continued, corporations can obtain value financial savings, with most flexibility, early on within the course of.

Then Dr. Grieves requested the consultants how they felt about this sort of connectivity – how sensible, related merchandise “slot in to what we do.” Coleman introduced up the truth that the IoT and the IIoT are each “producing boatloads of information,” which is fascinating for corporations to have entry to. However, he questioned if clients have been utilizing the options within the appropriate manner.

“With the ability to be in tune to all of the traits and your finicky and glad clients is admittedly essential,” he mentioned. “However what’s an important expertise as we speak – a greater one could come alongside tomorrow.”

Holman chimed in right here, stating that the digital twin is an efficient software for fulfillment, as main challenges corporations as we speak face embrace the demand for elevated customization and higher high quality.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

“The one strategy to sustain is with the true 3DEXPERIENCE digital twin,” Holman mentioned.

Dr. Grieves then requested Laufer for his opinion relating to the 3DEXPERIENCE digital twin.

“All indicators present that we’re altering the world,” he answered. “Expertise just isn’t on the degree it ought to be, so it’s the time for the trade renaissance, and to have the citizen, shopper, and affected person on the coronary heart of the expertise you’re creating.”

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Trade Renaissance [Image: Dassault Systèmes]

Laufer introduced up vehicles, and talked about merely using in a single versus the driving expertise; for instance, Laufer requested the viewers members how many people have been glad with our automobile’s air-con. He talked about that in a latest go to to Boeing, firm representatives mentioned the flight expertise, versus simply delivering an airplane, and wished to know why we weren’t all speaking in regards to the Trade Renaissance.

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable“The brand new ebook is the expertise,” Laufer acknowledged, quoting Dassault. “We’re making a 3DEXPERIENCE twin. Within the digital world, you possibly can blow on it, push it, pull it.”

Dr. Grieves requested him how we will help clients “bridge the hole” between the bodily and digital worlds. Laufer defined that corporations are utilizing cyber methods to create these experiences, and that we’ve got to have the ability to create, grasp, and mannequin these methods – in spite of everything, once you wish to make music, you should first observe the scales. In most corporations, a designer creates the idea for a product and passes it on to the analyst engineer, who then runs simulations and sends it again for the modifications to be made. The 3DEXPERIENCE platform is ready to streamline all of those processes.

He requested, “How will you automate when you don’t do it correctly in an interactive manner?”

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Dr. Grieves then introduced up how generative design is tied into manufacturing, since we’d like to have the ability to create new shapes, and requested Coleman how he feels that it “performs into the traditional invoice of supplies and collaboration.”

“From the ENOVIA facet, this can be a widespread factor that everybody needs to attain – this lack of productiveness,” he answered. “The widespread metric that comes again is 30% – what would you do with 30% of your time again?

“The invoice of supplies can’t sustain now, it’s too static, it’s too sluggish,” Coleman continued. “You possibly can’t stimulate and optimize this. So it’s actually a report of the place you’re at – mainly a 2D drawing.”

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Turning to Holman, Dr. Grieves requested him the place simulation match.

“Mainly, we are able to present the instruments, the manpower, the signers, and the innovators to construct merchandise that behave the best way they’re meant. That is what we’re bringing along with generative design,” Holman answered.

“In the long run, the merchandise we create should ship the fitting experiences to the purchasers, they should be sustainable.”

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Dr. Grieves then requested Coleman his perspective of the place he thought every thing within the dialogue slot in.

“Necessities are driving every thing, together with what you do in modeling and simulation,” he mentioned. “A number of instances, these are managed in emails, sticky notes, paperwork, Excel recordsdata, so on. Historically, we are able to do file administration, and we do it properly. However we have to transfer previous this and begin managing the innovation. Extract the essential data as knowledge, and join it.”

Laufer then had the possibility to share his views on the matter.

“The problem engineering groups face is you’ve an issue in entrance of you – the subject is to optimize a number of KPI. How do you mannequin in your present system? We’ve a manner within the platform to comply with KPIs when you’re designing and simulating to ensure you’re stepping into the fitting path. This resolution will increase the engineering groups by permitting them to discover, and simulate.

“I’m closely utilizing David’s expertise in my CATIA functions,” Laufer continued. “Your position as an engineering staff will likely be to discover, simulate, and optimize – the geometry, materials composition, materials choice, manufacturing course of. That is what the way forward for engineering is about. The 3DEXPERIENCE platform offers this built-in setting that lets stakeholders of those selections play collectively. 3DEXPERIENCE is multidisciplinary.”

3DEXPERIENCE Modeling & Simulation Convention: Keynote by Skunk Works & Government Roundtable

Lastly, Dr. Grieves requested every participant what an important takeaway from the dialogue was for the viewers to know. Holman acknowledged that SIMULIA was making some robust investments to be able to fulfill the promise of creating excessive constancy simulation extra accessible, which “is gong to be nice for all of you.” Coleman defined that ENOVIA is working to optimize issues on the enterprise course of degree, because it considerations “organizing and orchestrating all of this, and having the ability to modify the plan.”

Laufer mentioned, “Chatting with you as customers, your job will evolve. Simulation consultants will be capable to modify mesh, and work with the designer to suggest options. I feel there’s going to be a fusion, however don’t be afraid of that.”

Keep tuned for extra information from my time on the latest 3DEXPERIENCE Modeling & Simulation Convention!

Talk about this story and different 3D printing subjects at 3DPrintBoard.com or share your ideas within the Fb feedback beneath.

[Photos by Sarah Saunders] Please allow JavaScript to view the feedback powered by Disqus.

Credit score : Supply Hyperlink

Related posts